Ottawa, Canada
Ottawa Convention Centre
May 11-13, 2015
15th IFAC/IEEE/IFIP/IFORS Symposium
on Information Control Problems
in Manufacturing
  

15th IFAC Symposium on Information Control Problems in Manufacturing
May 11-13, 2015, Ottawa Convention Centre, Ottawa, Canada

Program at a Glance    Sunday    Monday    Tuesday    Wednesday    Author Index    Keyword Index    My Program  

Last updated on September 25, 2017. This conference program is tentative and subject to change

Technical Program for Tuesday May 12, 2015

To show or hide the keywords and abstract of a paper (if available), click on the paper title
Open all abstracts   Close all abstracts
 
TPL Plenary Session, 214 Add to My Program 
1. David SIMCHI-LEVI - Identifying Risks and Mitigating Disruptions in the
Automotive Supply Chain
2. Michael PINEDO - Advances in Production Planning and Scheduling
 
 
Chair: Dolgui, AlexandreEc. Nationale Supérieure Des Mines De Saint-Etienne
Co-Chair: Stecke, Kathryn E.Univ. of Texas at Dallas
 
TA1 Regular Session, 209 Add to My Program 
Advances in Scheduling  
 
Chair: Zerhouni, NoureddineFEMTO-ST Inst. UMR CNRS 6174 - UFC / ENSMM / UTBM
Co-Chair: Tchernev, NikolayAuvergne Univ. IUP
 
10:30-10:50, Paper TA1.1 Add to My Program
A Job-Shop with an Energy Threshold Issue Considering Operations with Consumption Peaks
Kemmoe, SylverinCrcgm Ea 38 49
Lamy, DamienBlaise Pascal Univ. LIMOS UMR CNRS 6158
Tchernev, NikolayAuvergne Univ. IUP
 
10:50-11:10, Paper TA1.2 Add to My Program
Parallel Mode Schedule Generation Scheme
Pinha, Denis da CruzWest Virginia Univ
Ahluwalia, RashpalWest Virginia Univ
Carvalho, AndreaInst. Nacional De Tecnologia
 
11:10-11:30, Paper TA1.3 Add to My Program
Mining Scheduling Knowledge for Job Shop Scheduling Problem
Wang, ChenglongState Key Lab. of Industrial Control Tech. Inst
Rong, GangZhejiang Univ
Weng, WeiWaseda Univ
Feng, YiPingZheJiang Univ
 
11:30-11:50, Paper TA1.4 Add to My Program
Minimization of Maximum Lateness with Equals Processing Times for Single Machine
Lazarev, AlexanderInst. of Control Sciences, Russian Acad. of Sciences
Arkhipov, DmitryInst. of Control Sciences of Russian Acad. of Sciences
 
11:50-12:10, Paper TA1.5 Add to My Program
On the Complexity and Approximabiliy of the Fixed Interval Scheduling Problem with Energy Constraints
Sassi, OnsUniv. of Lorraine
Oulamara, AmmarLoria Umr 7503
 
12:10-12:30, Paper TA1.6 Add to My Program
Cyclic Scheduling of Flexible Job-Shop with Time Constraints and Resource Capacity Constraints
Zhang, HongchangEc. CENTRALE DE LILLE
Collart-Dutilleul, SimonIFSTTAR/ESTAS
Mesghouni, KhaledEc. Centrale De Lillle
 
TA2 Invited Session, 210 Add to My Program 
Manufacturing Process Innovation Based on AI and Service Science  
 
Chair: Silva, José ReinaldoUniv. of São Paulo
Co-Chair: Cologni, Alberto LuigiUniv. Degli Studi Di Bergamo
 
10:30-10:50, Paper TA2.1 Add to My Program
Smartphone Based Video-Telemetry Logger for Remote Maintenance Services
Cologni, Alberto LuigiUniv. Degli Studi Di Bergamo
Fasanotti, LucaUniv. of Bergamo
Dovere, EmanueleUniv. Degli Studi Di Bergamo
Previdi, FabioUniv. Degli Studi Di Bergamo
Bonfanti, SilviaUniv. Degli Studi Di Bergamo
Owen, Franklin CalebAlpha Omega Engineering, Inc
 
10:50-11:10, Paper TA2.2 Add to My Program
Manufacturing-As-A-Service― from E-Work and Service-Oriented Architecture to the Cloud Manufacturing Paradigm (I)
Moghaddam, MohsenPRISM Center and School of Industrial Engineering, Purdue Univ
Silva, José ReinaldoUniv. of São Paulo
Nof, Shimon Y.Purdue Univ
 
11:10-11:30, Paper TA2.3 Add to My Program
Activity Theory Based Context Model: Application for Enterprise Intelligent Assistant Systems
Dhuieb, Mohamed AnisIRCCYN
Laroche, FlorentIRCCyN, Ec. Centrale De Nantes
Belkadi, FaroukIRCCYN - Ec. Centrale De Nantes
Bernard, AlainEc. Centarle De Nantes
 
11:30-11:50, Paper TA2.4 Add to My Program
Survey on Product-Service System Applications in the Automotive Industry
Mahut, FabienUniv. De Tech. De Compiègne, Department of Mechanical
Daaboul, JoannaUniv. De Tech. De Compiègne, Department of Mechanical
Bricogne, MatthieuUniv. De Tech. De Compiègne, Department of Mechanical
Eynard, BenoitUTC
 
11:50-12:10, Paper TA2.5 Add to My Program
Service Architecture and Interface Design for Mobile Machine Parameter Optimization System
Kannisto, Petri JuhaniTampere Univ. of Tech
Hästbacka, DavidTampere Univ. of Tech
Vilkko, Matti KalervoTampere Univ. of Tech
Kuikka, SeppoTampere Univ. of Tech
 
12:10-12:30, Paper TA2.6 Add to My Program
DPWS Implementation of a Service Interface to the IMS Center Watchdog Agent (I)
Giacomolli, Anderson AntônioUFRGS
Pereira, Carlos EduardoFederal Univ. of Rio Grande Do Sul - UFRGS
Zuccolotto, MarcosUFRGS
 
TA3 Special Session, 211 Add to My Program 
Stochastic Cellular and Manufacturing System Design and Control Issues I  
 
Chair: Suer, GurselOhio Univ
Co-Chair: Sormaz, DusanOhio Univ
 
10:30-10:50, Paper TA3.1 Add to My Program
Comparative Study of Constructive and Improvement Algorithms for Cell Formation with Alternative Routings (I)
Sormaz, DusanOhio Univ
Arumugam, JaikumarOhio Univ
Suer, GurselOhio Univ
 
10:50-11:10, Paper TA3.2 Add to My Program
A Framework of Advanced Intelligent Manufacturing System with an Illustration (I)
Wang, Hung-KaiNational Tsing Hua Univ
Chien, Chen-FuNational Tsing Hua Univ
 
11:10-11:30, Paper TA3.3 Add to My Program
The Effect of Modular Feeder Units on the Tool Switching Cost (I)
Raduly-Baka, CsabaUniv. of Turku
 
11:30-11:50, Paper TA3.4 Add to My Program
Three Phase Approach for Cellular Design Considering Product Life Cycle Stages (I)
Ulutas, BernaEskisehir Osmangazi Univ
Suer, GurselOhio Univ
 
11:50-12:10, Paper TA3.5 Add to My Program
Group Technology Method for Optimal Production System Layout (I)
Sormaz, DusanOhio Univ
Lazarevic, DjordjeFaculty of Tech. Sciences in Novi Sad
Cosic, IlijaFaculty of Tech. Sciences
 
12:10-12:30, Paper TA3.6 Add to My Program
Zone Design of Tandem Loop AGVs Path with Hybrid Algorithm
Fan, XiuminShanghai JiaoTong Unversity
He, QichangShanghai JiaoTong Unversity
Zhang, YuanchunShanghai Jiaotong Univ
 
TA4 Special Session, 212 Add to My Program 
Advanced Evolutionary Algorithms for Effective Supply Chain Management  
 
Chair: Awasthi, AnjaliConcordia Univ
Co-Chair: Li, PengYunnan Univ
 
10:30-10:50, Paper TA4.1 Add to My Program
Decision Support System for Discrete Robust Berth Allocation (I)
Pratap, SaurabhIndian Inst. of Tech. Kharagpur
Nayak, AshutoshIndian Inst. of Tech. Kharagpur
Cheikhrouhou, NaoufelHaute école De Gestion De Genève, Univ. of Applied Sciences
Tiwari, Manoj KIndian Inst. of Tech. Kharagpur
 
10:50-11:10, Paper TA4.2 Add to My Program
Development of an Effective Cost Minimization Model for Food Grain Shipments (I)
Maiyar, Lohithaksha MIndian Inst. of Tech. Kharagpur
J Thakkar, JiteshIndian Inst. of Tech. Kharagpur
Awasthi, AnjaliConcordia Univ
Tiwari, Manoj KIndian Inst. of Tech. Kharagpur
 
11:10-11:30, Paper TA4.3 Add to My Program
Internet of Things for Power Transmission and Distribution Equipments: Intelligent Monitoring and Full Lifecycle Management (I)
Li, PengYunnan Univ
Cao, MinYunnan Electric Power Res. Inst
 
11:30-11:50, Paper TA4.4 Add to My Program
An Evolutionary Cooperative Approach Based on Communicating Agents for Dynamic Multi-Hop Ridematching Problem
Ben Cheikh, SondesEc. Centrale De Lille
Hammadi, SlimEc. Centrale De Lille
Tahon, ChristianUniv. De Valenciennes Et Du Hainaut Cambrésis
 
11:50-12:10, Paper TA4.5 Add to My Program
Integrating Genetic Algorithm with Time Control for Just-In-Time Scheduling Problems
Chen, JunruWaseda Univ
Weng, WeiWaseda Univ
Rong, GangZhejiang Univ
Fujimura, ShigeruWaseda Univ
 
12:10-12:30, Paper TA4.6 Add to My Program
A Hybrid Genetic Algorithm Used in Vehicle Dispatching for JIT Distribution in NC Workshop
Zhang, DanNanjing Univ. of Aeronautics and Astronautics
Zhang, ChengNanjing Univ. of Aeronautics and Astronautics
Xu, FengNanjing Univ. of Aeronautics and Astronautics
Zuo, DunwenColl. of Mechanical & Electrical Engingeering, Nanjing U
 
TA5 Regular Session, 104 Add to My Program 
Manufacturing Systems - I  
 
Chair: ElMaraghy, HodaUniv. of Windsor
Co-Chair: Agard, BrunoPol. De Montreal
 
10:30-10:50, Paper TA5.1 Add to My Program
Virtual Fusion: Integrating Virtual Components into a Physical Manufacturing System
Putman, NicholasUniv. of Michigan
Maturana, FranciscoRockwell Automation
Barton, KiraUniv. of Michigan
Tilbury, Dawn M.Univ. of Michigan
 
10:50-11:10, Paper TA5.2 Add to My Program
How to Define a Creative SME
Lavoie, CynthiaUniv. Du Québec à Trois-RivièRes
Abdulnour, GeorgesUniv. Du Québec à Trois-RivièRes
 
11:10-11:30, Paper TA5.3 Add to My Program
Towards Effective Management of Inconsistencies in Model-Based Engineering of Automated Production Systems
Feldmann, StefanTech. Univ. München
Herzig, Sebastian Johannes IngoGeorgia Inst. of Tech
Kernschmidt, KonstantinTech. Univ. München
Wolfenstetter, ThomasTech. Univ. München, Chair for Information Systems
Kammerl, DanielTech. Univ. Muenchen
Qamar, AhsanGeorgia Inst. of Tech
Lindemann, UdoTech. Univ. Muenchen
Krcmar, HelmutTech. Univ. München
Paredis, Christiaan Jos JanGeorgia Inst. of Tech
Vogel-Heuser, BirgitTech. Univ. of Munich
 
11:30-11:50, Paper TA5.4 Add to My Program
Framework for Evaluating Cognitive Support in Mixed Model Assembly Systems
Claeys, ArnoGhent Univ
Hoedt, StevenUGhent
Soete, NicolasUGent
Van Landeghem, HendrikGhent Univ
Cottyn, JohannesGhent Univ
 
11:50-12:10, Paper TA5.5 Add to My Program
Industrial Process Optimization Approach Based on Statistical Analysis of Input and Output Data
Vincent, BenjaminBlaise Pascal Univ. LIMOS UMR CNRS 6158
Duhamel, ChristopheBlaise Pascal Univ. LIMOS UMR CNRS 6158
Ren, LiboAuvergne Univ. CRCGM EA3849
Tchernev, NikolayAuvergne Univ. IUP
 
12:10-12:30, Paper TA5.6 Add to My Program
A Method for Automation Software Design of Mechatronic Systems in Manufacturing
Sangregorio, PaoloUniv. Degli Studi Di Bergamo
Cologni, Alberto LuigiUniv. Degli Studi Di Bergamo
Piccinini, AndreaUniv. Degli Studi Di Bergamo, Consorzio Intellimech
Scarpellini, AlanUniv. Degli Studi Di Bergamo
Previdi, FabioUniv. Degli Studi Di Bergamo
 
TA6 Special Session, 213 Add to My Program 
Enterprise Risk Management  
 
Chair: Marmier, FrançoisUniv. De Toulouse, Mines Albi, Centre Génie Industriel
Co-Chair: Koplyay, TamasUniv. Du Québec En Outaouais
 
10:30-10:50, Paper TA6.1 Add to My Program
Alliances Decision-Making in NPD: A Risk Point of View (I)
Filipas Deniaud, IoanaBETA UMR 7522 CNRS - Strasbourg Univ
Marmier, FrançoisUniv. De Toulouse, Mines Albi, Centre Génie Industriel
Gourc, DidierUniv. De Toulouse, Mines Albi, Centre Génie Industriel
 
10:50-11:10, Paper TA6.2 Add to My Program
Complex System Representation for Vulnerability Analysis (I)
Kamissoko, Daouda, KamissokoUniv. of Toulouse, École Des Mines D’albi-Carmaux
Peres, FrancoisENIT
Zaraté, Pascale, ZaratéUniv. of Toulouse 1 Capitole
Gourc, DidierUniv. De Toulouse, Mines Albi, Centre Génie Industriel
 
11:10-11:30, Paper TA6.3 Add to My Program
Integrating Uncertainty in Software Effort Estimation Using Bootstrap Based Neural Networks (I)
Laqrichi, SafaeUniv. De Toulouse, Mines Albi, Centre Génie Industriel
Marmier, FrançoisUniv. De Toulouse, Mines Albi, Centre Génie Industriel
Gourc, DidierUniv. De Toulouse, Mines Albi, Centre Génie Industriel
Nevoux, JeanACAPI
 
11:30-11:50, Paper TA6.4 Add to My Program
A Mixed Fuzzy Probabilistic Approach for Risk Assessment of Dynamic Systems
Flaus, Jean-MarieGrenoble-INP
Abdo, HousseinG-SCOP
 
11:50-12:10, Paper TA6.5 Add to My Program
Sustainable Global Supplier Selection Extended towards Sustainability Risks from (1+n)th Tier Suppliers Using Fuzzy AHP Based Approach
Awasthi, AnjaliConcordia Univ
Gold, StefanNottingham Univ. Business School, Nottingham
 
12:10-12:30, Paper TA6.6 Add to My Program
Risks Associated to the Energy Transition, and the Reactivation of Mature Oil Fields (I)
Teles, Eduardo OliveiraPostgraduate Program in Industrial Engineering – PEI, Federal Un
Grassi, Denise MangabeiraUFBA
Freires, Francisco GaudencioFederal Univ. of Bahia
Torres, Ednildo AndradeUFBA
 
TA7 , 214 Add to My Program 
Advanced Maintenance Engineering for Competitive and Sustainable
Manufacturing in a Big Data Environment - II
 
 
Chair: Macchi, MarcoPol. Di Milano
Co-Chair: Pereira, Carlos EduardoFederal Univ. of Rio Grande Do Sul - UFRGS
 
10:30-10:50, Paper TA7.1 Add to My Program
A Sustainable Approach to Aircraft Engine Maintenance (I)
Keivanpour, SamiraUniv. Laval
Ait-Kadi, DaoudLaval Univ
 
10:50-11:10, Paper TA7.2 Add to My Program
On the Integration of Intelligent Maintenance and Spare Parts Supply Chain Management (I)
Hellingrath, BerndUniv. of Muenster
Pereira, Carlos EduardoFederal Univ. of Rio Grande Do Sul - UFRGS
Espindola, DanubiaFederal Univ. of Rio Grande - FURG
Frazzon, Enzo MorosiniFederal Univ. of Santa Catarina
Cordes, Ann-KristinUniv. of Muenster
Saalmann, PhilippWestfälische Wilhelms-Univ. Münster
Zuccolotto, MarcosUFRGS
 
11:10-11:30, Paper TA7.3 Add to My Program
Evaluating the Impact of Spare Parts Pooling Strategy on the Maintenance of Unreliable Repairable System (I)
Chemweno, Peter KiprutoKU Leuven
Pintelon, LilianeKU Leuven
Muchiri, Peter NgangaDedan Kimathi Univ. of Tech
 
11:30-11:50, Paper TA7.4 Add to My Program
Risk Driven Engineering of Prognostics and Health Management Systems in Manufacturing (I)
Trapani, NataliaUniv. of Catania
Macchi, MarcoPol. Di Milano
Fumagalli, LucaPol. Di Milano
 
11:50-12:10, Paper TA7.5 Add to My Program
Rule-Based Mechanism to Optimize Asset Management Using a Technical Documentation Ontology (I)
Koukias, AndreasEc. Pol. Fédérale De Lausanne (EPFL)
Kiritsis, DimitrisEPFL
 
12:10-12:30, Paper TA7.6 Add to My Program
An Assessment Model for the Implementation of RFID in Tool Management (I)
Dovere, EmanueleUniv. Degli Studi Di Bergamo
Cavalieri, SergioUniv. of Bergamo
Ierace, StefanoCELS - Res. Center on Logistics and after Sales Service - Un
 
TA8 Regular Session, 215 Add to My Program 
Modelling and Simulation  
 
Chair: Alla, HassaneUJF
Co-Chair: Lefebvre, DimitriUniv. Le Havre
 
10:30-10:50, Paper TA8.1 Add to My Program
Predicting Machined Surface Topography Based on High Definition Metrology
Wang, MengShanghai Jiao Tong Univ
Du, ShichangSchool of Mechanical Engineering, Shanghai Jiaotong Univ
Xi, LifengShanghai Jiao Tong Univ
 
10:50-11:10, Paper TA8.2 Add to My Program
Tolerance Interval for Stochastic Processes with Timed Continuous Petri Nets
Lefebvre, DimitriUniv. Le Havre
Leclercq, EdouardUniv. Du Havre
Sanlaville, EricUniv. Le Havre
 
11:10-11:30, Paper TA8.3 Add to My Program
Continuous Petri Nets and Hybrid Automata for the Analysis of Manufacturing Systems
Ghomri, LatéfaAbou-Bekr Belkaïd Univ. - Tlemcen
Alla, HassaneUJF
 
11:30-11:50, Paper TA8.4 Add to My Program
Modeling and Automatic Calculation of Restart States for an Industrial Windscreen Mounting Station
Bergagård, PatrikChalmers Univ. of Tech
Fabian, MartinChalmers Univ. of Tech
Falkman, PetterAutomation Res. Group
 
11:50-12:10, Paper TA8.5 Add to My Program
Generating Low-Dimensional, Nonlinear Process Representations by Ordered Features
Fischer, SusanneKarlsruhe Univ. of Applied Sciences
Hensgen, OnnoKarlsruhe Univ. of Applied Sciences
Elshaabiny, MoustafaThe City Coll. of New York
Link, NorbertKarlsruhe Univ. of Applied Sciences
 
12:10-12:30, Paper TA8.6 Add to My Program
Taking Ideas from Paper to Practice: A Case Study of Improving Design Processes through Detailed Modeling and Systematic Analysis
Zhang, XiaoqiMcGill Univ
Hao, YuMcGill Univ
Thomson, VinceMcGill Univ
 
TB1 , 209 Add to My Program 
Replenishement Planning and Inventory Control - I  
 
Chair: Giard, VincentUniv. Paris-Dauphine (PSL)
Co-Chair: Chauhan, SatyaveerConcordia Univ
 
13:30-13:50, Paper TB1.1 Add to My Program
Optimal Control of Distribution Chains for Perishable Goods
Gaggero, MauroNational Res. Council of Italy
Tonelli, FlavioUniv. of Genova
 
13:50-14:10, Paper TB1.2 Add to My Program
Disruption Management for a Box Erecting Machine (I)
Kim, Woo RamKorea Aerospace Univ
Kim, Nam UookKorea Aerospace Univ. Logistics Major
Chang, Yoon SeokKorea Aerospace Univ
Son, Dong WooKorea Aerospace Univ. Ubiquitous Tech. Application Re
 
14:10-14:30, Paper TB1.3 Add to My Program
Forward Management of Spare Parts Stock Shortages Via Causal Reasoning Using Reinforcement Learning
Addouche, Sid-AliUniv. of Paris8
Ghorbel, NouhaUniv. OF PARIS 8
El Mhamedi, AbderrahmanUniv. of Paris8
 
14:30-14:50, Paper TB1.4 Add to My Program
High Variety Impacts on Bill of Materials Structure: Carmakers Case Study
Chatras, ClémentPSL - Paris-Dauphine Univ. (LAMSADE)
Giard, VincentUniv. Paris-Dauphine (PSL)
Sali, MustaphaRenault
 
14:50-15:10, Paper TB1.5 Add to My Program
High Variety Impacts on Master Production Schedule: A Case Study from the Automotive Industry
Chatras, ClémentPSL - Paris-Dauphine Univ. (LAMSADE)
Giard, VincentUniv. Paris-Dauphine (PSL)
Sali, MustaphaRenault
 
15:10-15:30, Paper TB1.6 Add to My Program
Towards Physical Internet-Enabled Prefabricated Housing Construction in Hong Kong (I)
Zhong, RunyangDepartment of Industry and Manufacturing Systems Engineering, Th
Huang, George Q.The Univ. of Hong Kong
Xu, GangyanThe Univ. of Hong Kong
 
TB2 Invited Session, 210 Add to My Program 
Intelligent and Adaptive Control in Production, Logistics and Services  
 
Chair: Cardin, OlivierIRCCyN
Co-Chair: Sallez, YvesUniv. of Valenciennes
 
13:30-13:50, Paper TB2.1 Add to My Program
Multicast Dataset Synchronization and Agent Negotiation in Distributed Manufacturing Control Systems (I)
Morariu, OctavianUniv. Pol. of Bucharest, FacultyofControlandComputer
Morariu, CristinaUniv. Pol. of Bucharest, Faculty of Control Andcompu
Borangiu, TheodorUniv. Rs
Raileanu, SilviuFaculty of Automatic Control and Computers
 
13:50-14:10, Paper TB2.2 Add to My Program
Governance Mechanism in Control Architectures for Flexible Manufacturing Systems (I)
Jimenez, Jose FernandoPontificia Univ. Javeriana
Bekrar, AbdelghaniUniv. of Valenciennes
Trentesaux, DamienUniv. of Valenciennes
Zambrano Rey, Gabriel MauricioPontificia Univ. Javeriana
Leitão, PauloPol. Inst. of Bragança
 
14:10-14:30, Paper TB2.3 Add to My Program
Extension of Holonic Paradigm to Smart Grids (I)
Ferreira, AdrianoPol. Inst. of Bragança
Ferreira, AngelaPol. Inst. of Bragança
Cardin, OlivierIRCCyN
Leitão, PauloPol. Inst. of Bragança
 
14:30-14:50, Paper TB2.4 Add to My Program
Performance Evaluation of Holonic-Based Online Scheduling for a Switch Arrival System (I)
Indriago, CarlosLUNAM Univ. IUT De Nantes – Univ. De Nantes, IRCCyN U
Cardin, OlivierIRCCyN
Bellenguez-Morineau, OdileLUNAM Univ. Ec. Des Mines De Nantes, IRCCyN UMR CNRS 659
Rakoto, NalyLUNAM Univ. Ec. Des Mines De Nantes, IRCCyN UMR CNRS 659
Castagna, PierreUniv. of Nantes
 
14:50-15:10, Paper TB2.5 Add to My Program
Implementation of a Process Orchestration Model in a Service Oriented Holonic Manufacturing System (I)
Gamboa Quintanilla, FranciscoIRCCyN
Cardin, OlivierIRCCyN
L'Anton, AnneIUT De Nantes
Castagna, PierreUniv. of Nantes
 
15:10-15:30, Paper TB2.6 Add to My Program
Some Optimization Aspects on the Lie Group SO(3)
Berkane, SoulaimaneWestern Univ
Tayebi, AbdelhamidLakehead Univ
 
TB3 Regular Session, 211 Add to My Program 
Cellular Manufacturing and Group Technology  
 
Chair: Suer, GurselOhio Univ
Co-Chair: Ulutas, BernaEskisehir Osmangazi Univ
 
13:30-13:50, Paper TB3.1 Add to My Program
An Examination of Throughput Protection Provided by Inventory and Capacity Buffers in a Serial Production System (I)
Ojha, DiveshUniv. of North Texas
Kulkarni, SaileshUniv. of North Texas
Fredendall, LawrenceClemson Univ
Singh, VijayE-Bay
 
13:50-14:10, Paper TB3.2 Add to My Program
Assessing the Number of Cells for a Cell Formation Problem (I)
Ulutas, BernaEskisehir Osmangazi Univ
 
14:10-14:30, Paper TB3.3 Add to My Program
Towards Operational Hedging for Logistics Uncertainty Management in Prefabrication Construction (I)
Zhai, YueThe Univ. of Hong Kong
Huang, George Q.The Univ. of Hong Kong
Zhong, RunyangDepartment of Industry and Manufacturing Systems Engineering, Th
 
14:30-14:50, Paper TB3.4 Add to My Program
New Lower Bounds for the Best-Case Schedule in Groups of Permutable Operations
Yahouni, ZakariaIRCCyN, Inst. De Recherche En Communications Et Cybernétique
Mebarki, NasserIUT De Nantes
Sari, ZakiUniv. of Tlemcen
 
14:50-15:10, Paper TB3.5 Add to My Program
Group Technology-Based Model and Cuckoo Optimization Algorithm for Resource Allocation in Cloud Computing
Shahdi-Pashaki, MiladShomal Univ
Teymourian, EhsanMazandaran Univ. of Science and Tech
Kayvanfar, VahidAmirkabir Univ. of Tech
Komaki, MohammadCase Western Res. Univ
Sajadi, ACase Western Res. Univ
 
15:10-15:30, Paper TB3.6 Add to My Program
Multi-Agent System for Solving Dynamic Operating Theater Facility Layout Problem
Chraibi, AbdelahadLASPI - Univ. De Lyon
Kharraja, SaïdUniv. De Lyon, Univ. Jean Monnet Saint Etienne
Osman, IbrahimSuliman S. Olayan’s School of Business, Business Information & D
Elbeqqali, OmarUSMBA - Univ. De Fès
 
TB4 Special Session, 212 Add to My Program 
Warehouse Design and Management  
 
Chair: Roy, DebjitIndian Inst. of Management Ahmedabad
Co-Chair: Taylor, G. DonVirginia Tech
 
13:30-13:50, Paper TB4.1 Add to My Program
The Impact of Order Picker Skills on Warehouse Performance (I)
De Koster, René B.M.Erasmus Univ. Rotterdam
 
13:50-14:10, Paper TB4.2 Add to My Program
Warehouse Design under Class-Based Storage Policy of Shuttle-Based Storage and Retrieval System (I)
Ekren, BanuIzmir Univ. of Ec
Sari, ZakiUniv. of Tlemcen
Lerher, ToneUniv. of Maribor
 
14:10-14:30, Paper TB4.3 Add to My Program
Layout Optimization of a Three Dimensional Order Picking Warehouse (I)
Adil, Gajendra KIndian Inst. of Tech. Bombay
Rakesh, VenkitasubramonyIndian Inst. of Tech. Bombay
 
14:30-14:50, Paper TB4.4 Add to My Program
Performance Analysis of Warehouse Systems with Dynamic Batching (I)
Roy, DebjitIndian Inst. of Management Ahmedabad
Dhingra, VibhutiIndian Inst. of Management Ahmedabad
 
14:50-15:10, Paper TB4.5 Add to My Program
Challenges and Opportunities in Dense Warehousing (I)
Taylor, G. DonVirginia Tech
 
15:10-15:30, Paper TB4.6 Add to My Program
Order Picking Travel Distance Estimation in Picker-To-Parts Warehouses Using Monte-Carlo Simulation to Design Rectangular Warehouse Sections (I)
Venkatadri, UdayDalhousie Univ
Khalil, MoayadDalhousie Univ
Diallo, ClaverDalhousie Univ
 
TB5 Regular Session, 104 Add to My Program 
Engineering Optimization  
 
Chair: Belkadi, FaroukIRCCYN - Ec. Centrale De Nantes
Co-Chair: Oncan, TemelGALATASARAY Univ
 
13:30-13:50, Paper TB5.1 Add to My Program
The Dynamic Family Assignment Heuristic
Bayley, Tiffany A.Univ. of Waterloo
Bookbinder, James H.Department of Management Sciences, Univ. of Waterloo
 
13:50-14:10, Paper TB5.2 Add to My Program
Tabu Search Heuristics for Two Bounded Degree Spanning Tree Problems
Oncan, TemelGALATASARAY Univ
 
14:10-14:30, Paper TB5.3 Add to My Program
Fuzzy Expert System Based Evaluation Framework for Management Procedure Models
Stahl, BenjaminTech. Univ. München
Zong, ZengTech. Univ. München
Plehn, ChristianTech. Univ. München, Inst. for Machine Tools And
Lohmann, BorisTech. Univ. München
 
14:30-14:50, Paper TB5.4 Add to My Program
Interruption Management in Human Multitasking Environments
Darmoul, SaberKing Saud Univ. KSU
Ahmad, AliNorthwestern State Univ
Ghaleb, MageedKing Saud Univ. KSU
Alkahtani, MohammedKing Saud Univ. KSU
 
14:50-15:10, Paper TB5.5 Add to My Program
Trust-Based Patterns for the Management of Inter-Enterprises Collaborations in Context of Extended Enterprise
Belkadi, FaroukIRCCYN - Ec. Centrale De Nantes
Bernard, AlainEc. Centarle De Nantes
 
15:10-15:30, Paper TB5.6 Add to My Program
A Fuzzy Handling of Trend Objective Declaration and Trend Performance Expression
Foulloy, LaurentUniv. De Savoie
Berrah, LamiaSavoie Univ
 
TB6 , 213 Add to My Program 
Workshop 3 - Manufacturing Systems Engineering: Fundamental Issues and Case
Studies
 
 
 
TPo7 , 214 Add to My Program 
Workshop 1 Additive Manufacturing and 3D Printing  
 
 
TPo8 Dissertation Session, 215 Add to My Program 
Doctoral Consortium  
 
Chair: Cretu, Ana-MariaUniv. Du Québec En Outaouais
Co-Chair: Zaremba, Marek B.Univ. of Quebec
 
13:30-18:00, Paper TPo8.1 Add to My Program
Joint Production and Replacement Strategy for a Quality Deteriorating Failure-Prone Manufacturing System
Ouaret, SamirEc. De Tech. Superieure
Kenné, Jean-PierreÉcole De Tech. Supérieure
Gharbi, AliÉcole De Tech. Supérieure
Polotski, VladimirEc. De Tech. Superieure
 
13:30-18:00, Paper TPo8.2 Add to My Program
Intelligent Agents for Cooperative Driving: Challenges and Solutions
Colmenares, GiancarloUniv. Nacional Experimental Del Táchira
Benyahia, IlhamUniv. Du Québec En Outaouais
Shawky, M.Univ. De Tech. De Compiègne
Zaremba, Marek B.Univ. Du Québec (UQO)
 
13:30-18:00, Paper TPo8.3 Add to My Program
Adaptable Capability-Based Planning
Keddis, NadineFortiss
Zoitl, AloisFortiss GmbH
Knoll, AloisTech. Univ. Muenchen TUM
 
13:30-18:00, Paper TPo8.4 Add to My Program
Multi-Strategy Navigation Planning Using Meta-Heuristics
Halal, FadiUQO
 
13:30-18:00, Paper TPo8.5 Add to My Program
Supply Chain Complexity in the Semiconductor Industry: Assessment from System View and the Impact of Changes
Sun, CanInfineon Tech. AG
Rose, ThomasFraunhofer FIT
 
13:30-18:00, Paper TPo8.6 Add to My Program
An Integrated Framework for Scarce Data Environment Modelling
Davila, Juan CarlosUQO
 
13:30-18:00, Paper TPo8.7 Add to My Program
A Multi-Objective Genetic Method Minimizing Tardiness and Energy Consumption During Idle Times
Al-Qaseer, Firas AbdulmajeedLIMOS/IFMA
Gien, DenisLimos - Umr Cnrs 6158
 
13:30-18:00, Paper TPo8.8 Add to My Program
Applying Complex Network Theory to the Assessment of Organizational Resilience
Ruiz-Martin, CristinaUniv. De Valladolid & Carleton Univ
Lopez-Paredes, AdolfoGrupo INSISOC. Departamento De Organización De Empresas Y CIM. E
Wainer, GabrielCarleton Univ
 
TPoster Poster Session, Atrium Add to My Program 
Poster Session  
 
Chair: Benmansour, RachidUniv. De Valenciennes Et Du Hainaut Cambrésis
Co-Chair: Miranda, SalvatoreUniv. of Salerno
 
13:30-18:00, Paper TPoster.1 Add to My Program
To the Problem of Dynamic Modeling and Management in an Integrated Environment of the Industrial Cluster (I)
Smirnova, GulnaraKazan National Res. Tech. Univ. Named after A.N.Tup
Sabitov, RustemKazan National Res. Tech. Univ. Named after A.N.Tup
Sabitov, ShamilKazan National Res. Tech. Univ. Named after A.N.Tup
Sirazetdinov, BulatKazan National Res. Tech. Univ. Named after A.N.Tup
Elizarova, NatalyaKazan National Res. Tech. Univ. Named after A.N.Tup
Morozov, BorisKAMAZ
 
13:30-18:00, Paper TPoster.2 Add to My Program
Adaptive Control and Operational Management System of Machine-Tool Fleet of the Manufacturing Enterprise (I)
Morozov, BorisKAMAZ
Rudnitckii, SergeiKAMAZ
Sabitov, RustemKazan National Res. Tech. Univ. Named after A.N.Tup
Smirnova, GulnaraKazan National Res. Tech. Univ. Named after A.N.Tup
Sirazetdinov, BulatKazan National Res. Tech. Univ. Named after A.N.Tup
Sabitov, ShamilKazan National Res. Tech. Univ. Named after A.N.Tup
 
13:30-18:00, Paper TPoster.3 Add to My Program
New Solutions for Thermal Treatment of Flat Products Using Self-Adjusting Mathematical Models with Partly Observable Parameters (I)
Nikulina, IrinaV.A. Trapeznikov Inst. of Control Sciences
Salikhov, ZufarV.A. Trapeznikov Inst. of Control Sciences
Gazimov, RuslanV.A. Trapeznikov Inst. of Control Sciences
Genkin, ArkadyV.A. Trapeznikov Inst. of Control Sciences
 
13:30-18:00, Paper TPoster.4 Add to My Program
Stability Conditions for Multimodal Power and Process Plants (I)
Bakhtadze, NataliaV.A. Trapeznikov Inst. of Control Sciences, Russian Acad
Yadykin, IgorV.A. Trapeznikov Inst. of Control Sciences, Russian Acad
Lototsky, VladimirV.A. Trapeznikov Inst. of Control Sciences
Sakrutina, EkaterinaV.A. Trapeznikov Inst. of Control Sciences, Russian Acad
Pesikov, EduardSt. Petersburg State Univ. of Tech. and Design
Maximov, EugeneInst. of Control Sciences of Russian Acad. Ofsciences
 
13:30-18:00, Paper TPoster.5 Add to My Program
Modeling of Singularly Perturbed Multi-Criterion Optimal Control Workflows (I)
Salikhov, ZufarV.A. Trapeznikov Inst. of Control Sciences
 
13:30-18:00, Paper TPoster.6 Add to My Program
Methods and Algorithms for the Solution of Inverse Problems of Modelling and Control in Reservoir Engineering (I)
Akhmetzyanov, AtlasInst. of Control Sciences, Russian Acad. of Sciences
Salnikov, AntonInst. of Control Sciences, Russian Acad. of Sciences
 
13:30-18:00, Paper TPoster.7 Add to My Program
Integrable Models of Oil Displacement (I)
Akhmetzyanov, AtlasInst. of Control Sciences, Russian Acad. of Sciences
Kushner, AlexeiInst. of Control Sciences of the Russian Acad. Ofsciences
Lychagin, ValentinTromsø Univ
 
13:30-18:00, Paper TPoster.8 Add to My Program
The Combined Scenario-Indicator Approach for Safety Improvements of Complex Technical Systems (I)
Somov, DmitryInst. of Control Sciences of Russian Acad. Ofsciences
Kulba, VladimirInst. of Control Sciences of Russian Acad. Of
Zaikin, OlegWarsaw School of Computer Science
 
13:30-18:00, Paper TPoster.9 Add to My Program
Feedback Invariants of Control Hamiltonian Systems (I)
Kushner, AlexeiInst. of Control Sciences of the Russian Acad. Ofsciences
Lychagin, ValentinTromsø Univ
 
13:30-18:00, Paper TPoster.10 Add to My Program
Lead Time Reduction in an Interactive Value Chain: Call-Request-Respond Time Reduction Using a Distributed Information Space (I)
Kristoffersen, SteinarMolde Univ. Coll
 
13:30-18:00, Paper TPoster.11 Add to My Program
Modeling of Reconfigurable Distributed Manufacturing Control Systems
Silva, Robson Marinho daUniv. Estadual De Santa Cruz (UESC)
Benítez Pina, Israel FranciscoUniv. Do Estado De Amazonas
Blos, Mauricio F.Pol. School of the Univ. of São Paulo
Santos Filho, Diolino JoséEscola Pol. - Univ. of São Paulo (USP)
Miyagi, Paulo EigiUniv. of Sao Paulo, Escola Pol
 
13:30-18:00, Paper TPoster.12 Add to My Program
Modeling Fashion Retail Supply Chain through Causal Loop Diagram
Iannone, RaffaeleUniv. of Salerno
Martino, GiadaUniv. of Salerno
Miranda, SalvatoreUniv. of Salerno
Riemma, StefanoUniv. of Salerno
 
13:30-18:00, Paper TPoster.13 Add to My Program
Extremes Control of Complex Systems with Applications to Social Networks
Markovich, NataliaV.A.Trapeznikov Inst. of Control Sciences
 
13:30-18:00, Paper TPoster.14 Add to My Program
Adaptive Vibration Control of a Flexible Cable Driven Parallel Robot (I)
Jamshidifar, HamedUniv. of Waterloo
Fidan, BarisUniv. of Waterloo
Gungor, GokhanUniv. of Waterloo
Khajepour, AmirUniv. of Waterloo
 
13:30-18:00, Paper TPoster.15 Add to My Program
Multi-Agent Systems within Modeling and Identification Problems
Chernyshov, KirillV.A. Trapeznikov Inst. of Control Sciences
 
13:30-18:00, Paper TPoster.16 Add to My Program
A Multi-Item Constrained EOQ Calculation Algorithm with Exit Condition: A Comparative Analysis
Miranda, SalvatoreUniv. of Salerno
Fera, MarcelloSecond Univ. of Naples
Iannone, RaffaeleUniv. of Salerno
Riemma, StefanoUniv. of Salerno
 
13:30-18:00, Paper TPoster.17 Add to My Program
Software Tools to Model and Investigate Technological and Economical Efficiency of Nuclear Power Plants: A Real Case Study (I)
Jharko, ElenaV.A. Trapeznikov Inst. of Control Sciences
 
13:30-18:00, Paper TPoster.18 Add to My Program
A Novel Safety Control Hierarchical Architecture for Prevention and Mitigation of Critical Faults in Process Industries Based on Defense-In-Depth, Reactive Systems and Safety-Diagnosability (I)
Squillante Júnior, ReinaldoUniv. of São Paulo
Santos Filho, Diolino JoséEscola Pol. - Univ. of São Paulo (USP)
Silva, Robson Marinho daUniv. Estadual De Santa Cruz (UESC)
Souza, Afonso Lopes, JefersonEscola Pol. Da Univ. De São Paulo
Junqueira, FabrícioEscola Pol. Univ. of São Paulo
Miyagi, Paulo EigiUniv. of Sao Paulo, Escola Pol
 
13:30-18:00, Paper TPoster.19 Add to My Program
A Generalized Version of the Periodic Maintenance Problem (I)
Benmansour, RachidUniv. De Valenciennes Et Du Hainaut Cambrésis
Todosijevic, RacaUniv. of Valenciennes
Hanafi, SaidUniv. De Valenciennes Le Mont Houy
Artiba, AbdelhakimUniv. De Valenciennes
 
13:30-18:00, Paper TPoster.20 Add to My Program
Online Estimation and Compensation of Friction in Industrial Cable Robot Manipulation (I)
Gungor, GokhanUniv. of Waterloo
Turhan, Mustafa HakanUniv. of Waterloo
Jamshidifar, HamedUniv. of Waterloo
Fidan, BarisUniv. of Waterloo
 
13:30-18:00, Paper TPoster.21 Add to My Program
A Structural Prediction Concept for Railway State Forecasting Problem
Mandel, AlexanderTrapeznikov Inst. of Control Sciences of RussianAcademy
Bordukov, DmitryLomonosov Moscow State Univ. Faculty of Physics
Dorofeyuk, AlexanderInsitute of Control Sciences of RAS
Dorofeyuk, JuliaInsitute of Control Sciences of RAS
Chernyavskiy, AlexandrInst. of Control Sciense
 
13:30-18:00, Paper TPoster.22 Add to My Program
Contractual Delivery Time Finding with Accumulation of Goods in Consolidation Warehouse (I)
Zalozhnev, AlexeyV.A. Trapeznikov Inst. of Control Sciences of the Russian Ac
Zalozhnev, DmitryEnergas, Llc
Chistov, DmitryFinancial Univ. under the Government of the Russian Federat
 
13:30-18:00, Paper TPoster.23 Add to My Program
Information Support and Skill Evaluation of Human-Operators (I)
Chernyshov, KirillV.A. Trapeznikov Inst. of Control Sciences
Jharko, ElenaV.A. Trapeznikov Inst. of Control Sciences
 
13:30-18:00, Paper TPoster.24 Add to My Program
Probabilistic Description of Stock Movement at the Terminal with Regular Completion
Troyanovskyi, Vladimir MikhailovichNational Res. Univ. of Electronic Tech
Lin Aung, YanDefence Service Acad
 
13:30-18:00, Paper TPoster.25 Add to My Program
Estimating the Compound Poisson Demand’s Parameters for Single Period Problem for Large Lot Size (I)
Kitaeva, AnnaTomsk Pol. Univ. Tomsk, Russia
Subbotina, ValentinaNational Res. Tomsk State Univ
Stepanova, NatalyaTomsk State Univ
 
13:30-18:00, Paper TPoster.26 Add to My Program
Feedback Control and Kalman Filtering of Nonlinear Wave Dynamics
Rigatos, GerasimosIndustrial Systems Inst
 
13:30-18:00, Paper TPoster.27 Add to My Program
Control of Heat Diffusion in Arc Welding Using Differential Flatness Theory and Nonlinear Kalman Filtering (I)
Rigatos, GerasimosIndustrial Systems Inst
 
13:30-18:00, Paper TPoster.28 Add to My Program
The Newsvendor Problem with Fast Moving Items and a Compound Poisson Price Dependent Demand
Kitaeva, AnnaTomsk Pol. Univ. Tomsk, Russia
Zmeev, Oleg A.National Res. Tomsk State Univ
Subbotina, ValentinaNational Res. Tomsk State Univ
 
13:30-18:00, Paper TPoster.29 Add to My Program
A Methodology to Solve the Order Batching Problem (I)
Zuniga, CatyaUPAEP
Olivares-Benitez, EliasUPAEP Univ
Tenahua, Angélica MaríaUPAEP / Univ. Anáhuac De Puebla
Mujica Mota, Miguel AntonioUniv. Autonoma De Barcelona
 
13:30-18:00, Paper TPoster.30 Add to My Program
Safety Stock Levels in Modular Product System Using Commonality and Part Families (I)
Hernández Ruiz, Kenneth EdgarUniv. Popular Autónoma Del Estado De Puebla
Olivares-Benitez, EliasUPAEP Univ
Zuniga, CatyaUPAEP
 
13:30-18:00, Paper TPoster.31 Add to My Program
Automated Data Acquisition for a Large Scale Capacitated Vehicle Routing Problem (I)
Garzon Garnica, Eduardo ArturoUPAEP
Cruz, Benitez, Diana PatriciaUPAEP
Badillo, Omar DavidUniv. Popular Autónoma Del Estado De Puebla
Sánchez-Partida, DianaUPAEP Univ
Martinez - Flores, Jose LuisUPAEP Univ
 
13:30-18:00, Paper TPoster.32 Add to My Program
A Case of Study: SMED & JIT Methodologies to Develop Continuous Flow of Stamped Parts into AC Disconnect Assembly Line in Schneider Electric Tlaxcala Plant (I)
Rodriguez, RodolfoUPAEP Univ
Sánchez-Partida, DianaUPAEP Univ
Martinez - Flores, Jose LuisUPAEP Univ
Arvizu Barron, EzequielColegio De Postgraduados
 
TC1 , 209 Add to My Program 
Replenishement Planning and Inventory Control - II  
 
Chair: Boctor, FayezUniv. Laval
Co-Chair: Baboli, ArmandINSA-Lyon, DISP Lab. F-69621, France
 
16:00-16:20, Paper TC1.1 Add to My Program
A Stochastic Methodology for the Optimal Management of Infrequent Demand Spare Parts in the Automotive Industry
Ronzoni, ChiaraUniv. of Modena and Reggio Emilia
Ferrara, AndreaUniv. Degli Studi Di Modena E Reggio Emilia
Grassi, AndreaUniv. Di Modena E Reggio Emilia
 
16:20-16:40, Paper TC1.2 Add to My Program
In-House Production and Sourcing Competition under Demand Uncertainties
Jain, TarunIIM Bangalore
Hazra, JishnuIndian Inst. of Management Bangalore
 
16:40-17:00, Paper TC1.3 Add to My Program
Inventory Replenishment Planning and Staggering
Boctor, FayezUniv. Laval
Bolduc, Marie-ClaudeUniv. Laval
 
17:00-17:20, Paper TC1.4 Add to My Program
Workload Control-Related Workload Route Decision
Zhao, BoxuanXi'an Jiaotong Univ
Gao, JianminXi'an Jiaotong Univ
 
17:20-17:40, Paper TC1.5 Add to My Program
Supply Chain Configuration towards Customization: A Comparison between Small and Large Series Production
Fornasiero, RosannaCNR
Macchion, LauraUniv. of Padua
Vinelli, AndreaUniv. of Padua
 
17:40-18:00, Paper TC1.6 Add to My Program
Design of Warehouse Control System for Real Time Management (I)
Son, Dong WooKorea Aerospace Univ. Ubiquitous Tech. Application Re
Chang, Yoon SeokKorea Aerospace Univ
Kim, Woo RamKorea Aerospace Univ
 
TC2 Invited Session, 210 Add to My Program 
Manufacturing in a Big Data Environment - I  
 
Chair: Macchi, MarcoPol. Di Milano
Co-Chair: Cavalieri, SergioUniv. of Bergamo
 
16:00-16:20, Paper TC2.1 Add to My Program
A Distributed Agent-Based Approach to Manage Industrial Wireless Sensor Networks (I)
Taboun, MohammedUniv. of Calgary
Gholami, MohammadSchulich School of Engineering, Univ. of Calgary
Brennan, RobertUniv. of Calgary
 
16:20-16:40, Paper TC2.2 Add to My Program
Knowledge Formalization for Experts’ Selection into a Collaborative Maintenance Platform
Bekkaoui, MokhtariaEPST, Tlemcen. Manufacturing Engineering Lab. of Tlemcen (
Karray, HediLGP-ENIT
Sari, ZakiUniv. of Tlemcen
 
16:40-17:00, Paper TC2.3 Add to My Program
Designing an Artificial Immune Systems for Intelligent Maintenance Systems (I)
Zuccolotto, MarcosUFRGS
Pereira, Carlos EduardoFederal Univ. of Rio Grande Do Sul - UFRGS
Fasanotti, LucaUniv. of Bergamo
Cavalieri, SergioUniv. of Bergamo
Lee, JayUniv. of Cincinnati
 
17:00-17:20, Paper TC2.4 Add to My Program
Integrating Maintenance within the Production Process through a Flexible E-Maintenance Platform (I)
Fumagalli, LucaPol. Di Milano
Macchi, MarcoPol. Di Milano
 
17:20-17:40, Paper TC2.5 Add to My Program
RFID Implementation in a Supply Chain: Comparison of Three Case Studies (I)
Talla, MalleswaraJohn Molson School of Business, Concordia Univ. Montreal
 
17:40-18:00, Paper TC2.6 Add to My Program
Model for a Predictive Maintenance System Effectiveness Using the Analytical Hierarchy Process As Analytical Tool
Baidya, RahulJADAVPUR Univ
Ghosh, SadhanJADAVPUR Univ
 
TC3 Regular Session, 211 Add to My Program 
Reconfigurable, Agile and Adaptable Manufacturing Systems  
 
Chair: Mascle, ChristianÉcole Pol. De Montréal
Co-Chair: Teufl, SabineFortiss GmbH
 
16:00-16:20, Paper TC3.1 Add to My Program
A New Approach for Analyzing Auto-Manufactures Strategic Choice in Applying End-Of-Life Vehicle Practices
Keivanpour, SamiraUniv. Laval
Ait-Kadi, DaoudLaval Univ
Mascle, ChristianÉcole Pol. De Montréal
 
16:20-16:40, Paper TC3.2 Add to My Program
An Approach for Peg-In-Hole Assembling Using Intuitive Search Algorithm Based on Human Behavior and Carried by Sensors Guided Industrial Robot
Abdullah, Mustafa WaadUniv. of Siegen
Roth, HubertUniv. Siegen
Weyrich, MichaelUniv. of Stuttgart
Wahrburg, JuergenUniv. of Siegen
 
16:40-17:00, Paper TC3.3 Add to My Program
Efficient Impact Analysis of Changes in the Requirements of Manufacturing Automation Systems
Teufl, SabineFortiss GmbH
Hackenberg, GeorgTech. Univ. München
 
17:00-17:20, Paper TC3.4 Add to My Program
A Framework for Modelling Reconfigurable Manufacturing Systems Using Hybridized Discrete-Event and Agent-Based Simulation
Khedri Liraviasl, KouroshUniv. of Windsor
ElMaraghy, HodaUniv. of Windsor
Hanafy, MohmmadUniv. of Windsor
Badrous, SamehUniv. of Windsor
 
17:20-17:40, Paper TC3.5 Add to My Program
Towards a Reconfigurable Inferior Limbs Exoskeleton for Assistive, Rehabilitation, and Empowering Application
Rodriguez, Carlos AlfonsoBlablabla
Lugo, EstherITESM
Ponce, PedroITESM-CCM
Molina, ArturoTecnologico De Monterrey
 
17:40-18:00, Paper TC3.6 Add to My Program
Product-Driven Generation of Action Sequences for Adaptable Manufacturing Systems
Keddis, NadineFortiss
Kainz, GerdFortiss
Zoitl, AloisFortiss GmbH
 
TC4 Invited Session, 212 Add to My Program 
Supply Chain Scheduling  
 
Chair: Ivanov, DmitryBerlin School of Ec. and Law
Co-Chair: Yalaoui, FaroukUniv. of Tech. of Troyes
 
16:00-16:20, Paper TC4.1 Add to My Program
Coordination of the Supply Chain Schedules with Re-Scheduling Considerations (I)
Ivanov, DmitryBerlin School of Ec. and Law
Sokolov, BorisSPIIRAS
 
16:20-16:40, Paper TC4.2 Add to My Program
Integrated Supply Chain Scheduling under Multi-Level Disruptions (I)
Sawik, TadeuszAGH Univ. of Science & Tech
 
16:40-17:00, Paper TC4.3 Add to My Program
Hybrid Modelling Approach for the Scheduling and Control of Integrated Production and Logistic Processes Along Export Supply Chains (I)
Frazzon, Enzo MorosiniFederal Univ. of Santa Catarina
Albrecht, AndréFederal Univ. of Santa Catarina
Hurtado, Paula AndreaFederal Univ. of Santa Catarina
de Souza Silva, LucasFederal Univ. of Santa Catarina
Pannek, JuergenUniv. of Bremen
 
17:00-17:20, Paper TC4.4 Add to My Program
Supply Chain Scheduling: A Motorcycle Assembly Case Study (I)
Pinha, Denis da CruzWest Virginia Univ
Ahluwalia, RashpalWest Virginia Univ
Carvalho, AndreaInst. Nacional De Tecnologia
Senna, PedroCentro Federal De Educacao Tecnologica
 
17:20-17:40, Paper TC4.5 Add to My Program
Integrated Scheduling of Material Flows and Information Services in Industry 4.0 Supply Networks (I)
Sokolov, BorisSPIIRAS
Ivanov, DmitryBerlin School of Ec. and Law
 
17:40-18:00, Paper TC4.6 Add to My Program
On-Line Supply Chain Scheduling Problem with Capacity Limited Vehicles
Han, BinUniv. of Saskatchewan
Zhang, WenjunUniv. of Saskatchewan
 
TC5 Invited Session, Add to My Program 
Models and Methods to Support the Re-Design of Flexible Production Systems  
 
Chair: Fay, AlexanderHelmut Schmidt Univ
Co-Chair: Kampert, DavidRWTH Aachen Univ
 
16:00-16:20, Paper TC5.1 Add to My Program
Systematic Reuse of Interdisciplinary Components Supported by Engineering Relations (I)
Schröck, SebastianHelmut-Schmidt-Univ. Hamburg
Zimmer, FlorianHelmut Schmidt Univ
Fay, AlexanderHelmut Schmidt Univ
Jäger, TobiasSiemens AG
 
16:20-16:40, Paper TC5.2 Add to My Program
A Framework for Simulation, Optimization and Information Management of Physically-Coupled Systems of Systems (I)
Kampert, DavidRWTH Aachen Univ
Nazari, ShaghayeghTech. Univ. Dortmund
Sonntag, ChristianTech. Univ. Dortmund
Epple, UlrichRWTH Aachen Univ
Engell, SebastianTU Dortmund
 
16:40-17:00, Paper TC5.3 Add to My Program
MAKO: MAnufacturing Knowledge Organization System to Support SME (I)
Bruno, GiuliaPol. Di Torino
Taurino, TeresaPol. Di Torino
Villa, AgostinoPol. Di Torino
 
17:00-17:20, Paper TC5.4 Add to My Program
Learning Behaviour Models of Discrete Event Production Systems from Observing Input/Output Signals (I)
Ladiges, JanHelmut-Schmidt-Univ. / Univ. of the Federal Armed Forc
Haubeck, ChristopherUniv. of Hamburg
Fay, AlexanderHelmut Schmidt Univ
Lamersdorf, WinfriedUniv. of Hamburg
 
17:20-17:40, Paper TC5.5 Add to My Program
Changeability of Manufacturing Automation Systems Using an Orchestration Engine for Programmable Logic Controllers (I)
Bührer, Ulrich TobiasTech. Univ. München
Legat, ChristophTech. Univ. München
Vogel-Heuser, BirgitTech. Univ. of Munich
 
17:40-18:00, Paper TC5.6 Add to My Program
A Method of Introducing CAD to Eplc for Motion Control (I)
Wu, HuifengHangzhou Dianzi Univ
Zhang, JiSchool of Computer Science and Tech. Hangzhou Dianzi Univ
Simon, ReneHarz Univ. of Applied Sciences
 
TC6 , 213 Add to My Program 
Workshop 2 - Business Innovation Management: Methodology and Tools  
 

 
 

 
 

 

Technical Content © IFAC

This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2017 PaperCept, Inc.
Page generated 2017-09-25  00:19:01 PST  Terms of use