Ottawa, Canada
Ottawa Convention Centre
May 11-13, 2015
15th IFAC/IEEE/IFIP/IFORS Symposium
on Information Control Problems
in Manufacturing
  

15th IFAC Symposium on Information Control Problems in Manufacturing
May 11-13, 2015, Ottawa Convention Centre, Ottawa, Canada

Program at a Glance    Sunday    Monday    Tuesday    Wednesday    Author Index    Keyword Index    My Program  

Last updated on September 25, 2017. This conference program is tentative and subject to change

Technical Program for Wednesday May 13, 2015

To show or hide the keywords and abstract of a paper (if available), click on the paper title
Open all abstracts   Close all abstracts
 
WPL Plenary Session, 214 Add to My Program 
Dan ZHANG -
Parallel Robotic Manipulators and Their Applications
 
 
Chair: Sasiadek, Jurek ZCarleton Univ
Co-Chair: Dolgui, AlexandreEc. Nationale Supérieure Des Mines De Saint-Etienne
 
WA1 Regular Session, 209 Add to My Program 
Production Planning and Scheduling - I  
 
Chair: Sawik, TadeuszAGH Univ. of Science & Tech
Co-Chair: Boctor, FayezUniv. Laval
 
09:15-09:30, Paper WA1.1 Add to My Program
Robust Production Capacity Planning of a Wafer Fabrication System with Uncertain Wafer Lots Transfer Probabilities
Chen Wenliang, WenliangSoutheast Univ
Wang, ZhengSoutheast Univ
Chan, Felix T. S.The Hong Kong Pol. Univ
 
09:30-09:45, Paper WA1.2 Add to My Program
Shapley-Based Side Payments and Simulated Annealing for Distributed Lot-Sizing
Eslikizi, SalihUniv. of Bremen
Ziebuhr, MarioUniv. of Bremen
Kopfer, HerbertUniv. of Bremen
Buer, TobiasUniv. of Bremen
 
09:45-10:00, Paper WA1.3 Add to My Program
Finite Capacity Planning Algorithm for Semiconductor Industry Considering Lots Priority
Mhiri, EmnaUniv. Grenoble Alpes
Jacomino, MireilleGrenoble INP
Mangione, FabienUniv. Grenoble Alpes
Vialletelle, PhilippeSTMicroelectronics
Lepelletier, GuillaumeSTMicroelectronics
 
10:00-10:15, Paper WA1.4 Add to My Program
A No-Wait Flow Shop System with Sequence Dependent Setup Times and Server Constraints
Samarghandi, HamedUniv. of Saskatchewan, Edwards School of Business
 
10:15-10:30, Paper WA1.5 Add to My Program
Near Optimal Scheduling of Steel-Making and Continuous Casting Process Based on Charge Splitting Policy
Liangliang, SunShenyang Jianzhu Univ
Luan, FangjunShenyang Jianzhu Univ
 
WA2 Regular Session, 210 Add to My Program 
Smart Factory and Intelligent Production  
 
Chair: Silva, José ReinaldoUniv. of São Paulo
Co-Chair: Sasiadek, Jurek ZCarleton Univ
 
09:15-09:30, Paper WA2.1 Add to My Program
Manufacturing Aspect of the IBCA Structure for Active Knowledge Content Representation in Product Model (I)
Horváth, LászlóÓbuda Univ
Fodor, JanosObudai Univ
Rudas, ImreÓbuda Univ
 
09:30-09:45, Paper WA2.2 Add to My Program
Cyber-Physical Systems Architecture for Self-Aware Machines in Industry 4.0 Environment (I)
Bagheri, BehradNSF I/UCRC for Intelligent Maintenance Systems, Univ. of Ci
Yang, ShanhuUniv. of Cincinnati
Kao, Hung-AnUniv. of Cincinnati
Lee, JayUniv. of Cincinnati
 
09:45-10:00, Paper WA2.3 Add to My Program
Manufacturing Service: From E-Work and Service-Oriented Approach towards a Product-Service Architecture (I)
Silva, José ReinaldoUniv. of São Paulo
Nof, Shimon Y.Purdue Univ
 
10:00-10:15, Paper WA2.4 Add to My Program
Combining KAOS and GHENeSys in the Requirement and Analysis of Service Manufacturing (I)
Silva, Javier MartínezUSP
Silva, José ReinaldoUniv. of São Paulo
 
10:15-10:30, Paper WA2.5 Add to My Program
Robot Based Fire Detection in Smart Manufacturing Facilities
Rehman, Adeel urUniv. of Ottawa, Department of Mechanical Engineering, Otta
Necsulescu, Dan SorinUniv. of Ottawa
Sasiadek, Jurek ZCarleton Univ
 
WA3 Regular Session, 211 Add to My Program 
Performance Analysis of Production Lines  
 
Chair: Meerkov, Semyon M.Univ. of Michigan
Co-Chair: Colledani, MarcelloPol. Di Milano
 
09:15-09:30, Paper WA3.1 Add to My Program
A Method for "Sweet Point" Operation of Re-Entrant Lines
Meerkov, Semyon M.Univ. of Michigan
Yan, Chao-BoUniv. of Michigan
 
09:30-09:45, Paper WA3.2 Add to My Program
Production Control of Door Manufacturing Line at an Automotive Assembly Plant
Zhao, CongUniv. of Wisconsin - Madison
Li, JingshanUniv. of Wisconsin - Madison
 
09:45-10:00, Paper WA3.3 Add to My Program
Improving the Performance of a New Storage and Retrieval Machine Based on a Parallel Manipulator Using FMEA Analysis
Salah, BashirKing Saud Univ
Janeh, OmarUniv. of Duisburg-Essen
Bruckmann, TobiasUniv. of Duisburg-Essen
Noche, BerndDuisburg Essen Univ
 
10:00-10:15, Paper WA3.4 Add to My Program
A Framework to Evaluate Performance of Disperse Productive System through the Sustainability Performance Indicators
Watanabe, Edson HiroshiUniv. of Sao Paulo
Miyagi, Paulo EigiUniv. of Sao Paulo, Escola Pol
Junqueira, FabrícioEscola Pol. Univ. of São Paulo
Santos Filho, Diolino JoséEscola Pol. - Univ. of São Paulo (USP)
Blos, Mauricio F.Pol. School of the Univ. of São Paulo
Silva, Robson Marinho daUniv. Estadual De Santa Cruz (UESC)
 
10:15-10:30, Paper WA3.5 Add to My Program
Transient Analysis of Bernoulli Serial Line with Perishable Products
Ju, FengUniv. of Wisconsin - Madison
Li, JingshanUniv. of Wisconsin - Madison
Horst, JohnNational Inst. of Standards and Tech
 
10:30-10:45, Paper WA3.6 Add to My Program
Verification of Design Rules As an Evaluation Method During the Reconfiguration Process of Production Systems
Feno, Mahenina RemielLSIS
Ferrarini, AlainLSIS - Lab. Des Sciences De L'information Et Des Systèmes
Cauvin, AlineLab. Des Sciences De L'information Et Des Systèmes
 
WA4 Regular Session, 212 Add to My Program 
Supply Chain Modelling and Optimization  
 
Chair: Ivanov, DmitryBerlin School of Ec. and Law
Co-Chair: Sethi, Suresh P.Univ. of Texas at Dallas
 
09:15-09:30, Paper WA4.1 Add to My Program
Ripple Effect in the Time-Critical Food Supply Chains and Recovery Policies (I)
Dolgui, AlexandreEc. Nationale Supérieure Des Mines De Saint-Etienne
Ivanov, DmitryBerlin School of Ec. and Law
Jie, FerryRMIT
Sokolov, BorisSPIIRAS
Solovyeva, InnaSt. Petersburg State Univ
 
09:30-09:45, Paper WA4.2 Add to My Program
Building Theory of Green Supply Chain Management Using Total Interpretive Structural Modeling (TISM)
Dubey, RameshwarSymbiosis International Univ. Symbiosis Inst. of Opera
Gunasekaran, AngappaCharlton Coll. of Business, Univ. of Massachusetts Dartmou
Bag, SurajitTega Industries Limited
Fosso Wamba, SamuelNEOMA Business School, Rouen
 
09:45-10:00, Paper WA4.3 Add to My Program
5 Steps to Supply Chain Coordination (I)
Li, TaoSanta Clara Univ.
Sethi, Suresh P.Univ. of Texas at Dallas
 
10:00-10:15, Paper WA4.4 Add to My Program
Designing Sustainable Supply Chain under Innovation Influence (I)
Artsiomchyk, YuliyaBelarusian State Univ. of Informatics and Radioelectronics
Zhivitskaya, HelenaBSUIR (Belarusian State Univ. of Informatics and Radioelect
 
10:15-10:30, Paper WA4.5 Add to My Program
Supply Chain Design with Disruption Considerations: Review of Research Streams on the Ripple Effect in the Supply Chain (I)
Ivanov, DmitryBerlin School of Ec. and Law
Dolgui, AlexandreEc. Nationale Supérieure Des Mines De Saint-Etienne
Sokolov, BorisSPIIRAS
 
WA5 Regular Session, 104 Add to My Program 
Manufacturing Systems - II  
 
Chair: Battini, DariaUniv. of Padua
Co-Chair: Koltai, TamasBudapest Univ. of Tech. and Ec
 
09:15-09:30, Paper WA5.1 Add to My Program
A Hybrid Bat Algorithm to Process Planning Problem
Wang, JinfengNorth China Electric Power Univ
Xiaoliang, FanNorth China Electric Power Univ
Ailin, ZhaoNorth China Electric Power Univ
MingQiang, YangSchool of Information Science and Engineering Shandong Univ
 
09:30-09:45, Paper WA5.2 Add to My Program
A Workflow Decision Support System for Achieving Customer Satisfaction in Warehouses Serving Machinery Industry
Cheng, Stephen W.Y.The Hong Kong Pol. Univ
Choy, K.L.The Hong Kong Pol. Univ
Lam, Hoi YanThe Hong Kong Pol. Univ
 
09:45-10:00, Paper WA5.3 Add to My Program
Relationship between the Design Height of the Shelves in Industrial Warehouses and Their Heat Release Rate
Fera, MarcelloSecond Univ. of Naples
Fruggiero, FabioUniv. of Basilicata
Lambiase, AlfredoUniv. of Salerno - Department of Industrial Engineering
Macchiaroli, RobertoSecond Univ. of Naples - Department of Industrial and Infor
Miranda, SalvatoreUniv. of Salerno
 
10:00-10:15, Paper WA5.4 Add to My Program
Virtual Assembly of an Airplane Turbine Engine
Ahmad, AliNorthwestern State Univ
Al-Ahmari, Abdulrahman M.FARCAMT, Advanced Manufacturing Inst. King Saud Univ
Aslam, Muhammad UsmanFARCAMT, Advanced Manufacturing Inst. King Saud Univ
Abidi, Mustufa H.FARCAMT, Advanced Manufacturing Inst. King Saud Univ
Darmoul, SaberColl. of Engineering, King Saud Univ. Riyadh
 
10:15-10:30, Paper WA5.5 Add to My Program
An MIP Approach to Optimize the Fundamental Period of Multi-Cluster Tools System with Residency Constraints
Wang, ZhuSchool of Mechanical Engineering, Tongji Univ. Shanghai, P
Bekrar, AbdelghaniUniv. of Valenciennes
Trentesaux, DamienUniv. of Valenciennes
Zhou, BinghaiSchool of Mechanical Engineering, Tongji Univ. Shanghai, P
 
WA6 Invited Session, 213 Add to My Program 
Information Sharing and Its Impact on Inventory Management in Production &
Logistics Systems
 
 
Chair: Wilson, JohnIvey School-Western Univ
Co-Chair: Wang, ZhengSoutheast Univ
 
09:15-09:30, Paper WA6.1 Add to My Program
Evaluation of the Impact of Uncertain Advance Demand Information on Production/Inventory Systems (I)
Benbitour, Mohammed HichameEc. Centrale De Paris
Sahin, EvrenEc. Centrale Paris Lab. Génie Industriel
 
09:30-09:45, Paper WA6.2 Add to My Program
The Impact of Advance Demand Information on the Performance of Production/inventory Systems (I)
Rostami-Tabar, BahmanEc. Central Paris
Sahin, EvrenEc. Centrale Paris
 
09:45-10:00, Paper WA6.3 Add to My Program
A Robust Heuristic Algorithm for Multiple-Customers Coordinated Scheduling of Delivery and Inventory Problem (I)
Hammoudan, ZakariaUniv. of Tech. of Belfort-Montbeliard (SeT/UTBM)
Grunder, OlivierUniv. De Tech. De Belfort-Montbéliard
El Moudni, AbdellahUTBM
 
10:00-10:15, Paper WA6.4 Add to My Program
On the Use of Simple Moving Averages for Supply Chains Where Information Is Not Shared (I)
Ali, MohammadCoventry Univ
Babai, Mohamed ZiedBEM Bordeaux Management School
Boylan, JohnLancaster Univ
Syntetos, ArisCardiff Univ
 
10:15-10:30, Paper WA6.5 Add to My Program
Robust Replenishment Control Policies for a Production/Inventory System with Invisible Stock Loss
Qiao, XueSoutheast Univ
Wang, ZhengSoutheast Univ
Chen, HaoxunTech. Univ. of Troyes
Li, MingSoutheast Univ
 
WA7 , 214 Add to My Program 
IP - Industrial Panel (9: 15 - 12: 30)  
 
Chair: Cavalieri, SergioUniv. of Bergamo
Co-Chair: Ouertani, ZiedUniv. of Cambridge
 
WA8 Special Session, 215 Add to My Program 
System Identification for Manufacturing Control Applications - I  
 
Chair: Bocewicz, GrzegorzKoszalin Univ. of Tech
Co-Chair: Nagesh, IndiraUniv. of Warwick
 
09:30-09:45, Paper WA8.2 Add to My Program
A Novel Identification Scheme for Physical Systems with Applications to System Health Monitoring (I)
Doraiswami, RajamaniUniv. of New Brunswick
Cheded, Lahouari ChededKFUPM
 
09:45-10:00, Paper WA8.3 Add to My Program
Wavelet Based Fault Detection and RLS Parameter Estimation of Conductive Fibers with a Simultaneous Estimation of Time-Varying Disturbance (I)
Schimmack, ManuelLeuphana Univ. of Lueneburg
McGaw, DavidLeuphana Univ. of Lueneburg
Mercorelli, PaoloLeuphana Univ. of Lueneburg
 
10:00-10:15, Paper WA8.4 Add to My Program
Fault Detection of Slow Speed Bearings Using an Integrated Approach (I)
Aye, Sylvester AondolumunUniv. of Pretoria
 
WB1 Regular Session, 209 Add to My Program 
Production Planning and Scheduling - II  
 
Chair: Delorme, XavierEc. Nationale Supérieure Des Mines De Saint-Etienne
Co-Chair: Soukhal, AmeurUniv. of Tours, France
 
11:00-11:15, Paper WB1.1 Add to My Program
Optimizing Series-Parallel Execution of Intersecting Blocks of Operations
Dolgui, AlexandreEc. Nationale Supérieure Des Mines De Saint-Etienne, France
Levin, GenrikhUnited Inst. of Informatics Problems, Belarus
Rozin, BorisUnited Inst. of Informatics Problems, Belarus
 
11:15-11:30, Paper WB1.2 Add to My Program
Scheduling UECT Trees with Communication Delays on Two Processors with Unavailabilities
Ben Abdellafou, KhaoulaInst. Supérieur D'informatique Et Télecommunications Hammam S
Sanlaville, EricUniv. Le Havre
Mahjoub, AmineColl. of Computers and Information Tech. Taif Univ
Korbaa, OuajdiISITCom Hammam Sousse, MARS Unit
 
11:30-11:45, Paper WB1.3 Add to My Program
A Stochastic Model for Operating Room Unique Equipment Planning under Uncertainty
Razmi, JafarUniv. of Tehran
Yousefi, Mohammad SadeghMalek E Ashtar Univ. of Tech
Barati, MehdiUniv. of Tehran
 
11:45-12:00, Paper WB1.4 Add to My Program
A New Heuristic Method for Solving Joint Job Shop Scheduling of Production and Maintenance
Fnaiech, NaderESSTT, Univ. Tunis
Fitouri, CyrineSIME, Univ. of Tunis
Varnier, ChristopheFemto-ST Inst
Fnaiech, FarhatESSTT Univ. Tunis, Tunisia
Zerhouni, NoureddineFEMTO-ST Inst. UMR CNRS 6174 - UFC / ENSMM / UTBM
 
12:00-12:15, Paper WB1.5 Add to My Program
A Memetic Algorithm for a Stochastic Lot-Sizing and Sequencing Problem
Ksenyia, SchemelevaUniv. of Lyon
Delorme, XavierEc. Nationale Supérieure Des Mines De Saint-Etienne
Dolgui, AlexandreEc. Nationale Supérieure Des Mines De Saint-Etienne
 
WB2 Invited Session, 210 Add to My Program 
Industrial Clusters: An Analysis on Horizontal Enterprises Networks  
 
Chair: Fornasiero, RosannaCNR
Co-Chair: Fekete Farkas, MariaSzent Istvan Univ
 
11:00-11:15, Paper WB2.1 Add to My Program
A Modular Approach for Integrated Inventory Management in Distribution Logistics
Kamphues, JosefFraunhofer Inst. for Material Flow and Logistics
Hegmanns, TobiasFraunhofer Inst. for Material Flow and Logistics
 
11:15-11:30, Paper WB2.2 Add to My Program
Systematic Bibliometric Analysis of Horizontal Network of Enterprises (I)
Pereira, RafaelFederal Tech. Univ. of Paraná
Resende, Luis MauricioTech. Federal Univ. - Paraná
Betim, Leozenir MendesUniv. Tecnológica Federal Do Paraná
Franciele, Franciele BonattoUniv. Tecnológica Federal Do Paraná
Von Agner, ThompsonTrade & Investment Promotion Bureau - Embassy of Brazil – Washin
 
11:30-11:45, Paper WB2.3 Add to My Program
Performance Management in Horizontal Business Networks: A Systematic Review (I)
Franciele, Franciele BonattoUniv. Tecnológica Federal Do Paraná
Resende, Luis MauricioTech. Federal Univ. - Paraná
Betim, Leozenir MendesUniv. Tecnológica Federal Do Paraná
Pereira, RafaelFederal Tech. Univ. of Paraná
Von Agner, ThompsonTrade & Investment Promotion Bureau - Embassy of Brazil – Washin
 
11:45-12:00, Paper WB2.4 Add to My Program
Forecasting Supply Chain Demand by Clustering Customers
Murray, Paul W.Pol. De Montreal
Agard, BrunoPol. De Montreal
Barajas, Marco A.Fisheries & Marine Inst. of Memorial Univ. Newfoundland
 
12:00-12:15, Paper WB2.5 Add to My Program
An Integrated Sustainable Partner Selection Approach with Closed-Loop Supply Chain Network Configuration
Kafa, NadineUniv. of Paris8
Hani, YasminaUniv. Paris 8
El Mhamedi, AbderrahmanUniv. of Paris8
 
WB3 Special Session, 211 Add to My Program 
Stochastic Cellular and Manufacturing System Design and Control Issues II  
 
Chair: Suer, GurselOhio Univ
Co-Chair: Kaku, IkouTokyo City Univ
 
11:00-11:15, Paper WB3.1 Add to My Program
A Discussion on Seru and Line-Seru Conversion (I)
Kaku, IkouTokyo City Univ.
 
11:15-11:30, Paper WB3.2 Add to My Program
Minimizing Total Cost and Number of Periods with Manpower Shortages in Synchronized Manufacturing Cells (I)
Hening, DyahOhio Univ.
Suer, GurselOhio Univ.
 
11:30-11:45, Paper WB3.3 Add to My Program
Stochastic Capacitated Hybrid Manufacturing System Design by Using the Cell Similarity Threshold to Combine Cellular and Process Layouts (I)
Egilmez, GokhanNorth Dakota State Univ.
Erenay, BulentDepartment of Industrial and Systems Engineering, Ohio Univ.
Suer, GurselOhio Univ.
 
11:45-12:00, Paper WB3.4 Add to My Program
Stochastic Facility Location and Capacity Allocation in Manufacturing Supply Chain Design (I)
Huang, JingCSX Transportation Inc.
Suer, GurselOhio Univ.
 
WB4 Special Session, 212 Add to My Program 
Internet of Things (IoT) for Supply Chain Management (SCM)  
 
Chair: Valverde, RaulConcordia Univ
Co-Chair: Kersten, GregoryConcordia Univ
 
11:00-11:15, Paper WB4.1 Add to My Program
The Effectiveness of COBIT 5 Information Security Framework for Reducing the Cyber Attacks on Supply Chain Management System (I)
Wolden, MarkBae Systems
Valverde, RaulConcordia Univ
Talla, MalleswaraJohn Molson School of Business, Concordia Univ. Montreal
 
11:15-11:30, Paper WB4.2 Add to My Program
Beyond Dynamic Pricing: Dynamic Product Configuration with Auction/Negotiation Mechanisms (I)
Kersten, GregoryConcordia Univ
 
11:30-11:45, Paper WB4.3 Add to My Program
The Use of Database Store Procedures for the Detection of Fraud in the Procurement Process (I)
Rasooli, FarzinSaleFish Software
Valverde, RaulConcordia Univ
 
11:45-12:00, Paper WB4.4 Add to My Program
An Extension Proposition for the Agent-Based Language Modeling Ontology for the Representation of Human-Driven Collaboration in Supply Chain Systems (I)
Avédissian, ArnaudUniv. of Liverpool
Valverde, RaulConcordia Univ
 
12:00-12:15, Paper WB4.5 Add to My Program
A Web Service for the Evaluation of the Risk of Bankruptcy of Suppliers by Using the Black-Scholes-Merton Model (I)
Valverde, RaulConcordia Univ
Barrad, SherifConcordia Univ
 
WB5 Regular Session, 104 Add to My Program 
Lean and Smart Manufacturing Systems  
 
Chair: Sprock, TimothyGeorgia Inst. of Tech
Co-Chair: Abdulnour, GeorgesUniv. Du Québec à Trois-RivièRes
 
11:00-11:15, Paper WB5.1 Add to My Program
A Conceptual Model for Operational Control in Smart Manufacturing Systems (I)
Sprock, TimothyGeorgia Inst. of Tech
McGinnis, LeonGeorgia Inst. of Tech
 
11:15-11:30, Paper WB5.2 Add to My Program
Lean Automation Enabled by Industry 4.0 Technologies (I)
Kolberg, DennisGerman Res. Center for Artificial Intelligence
Zuehlke, DetlefGerman Res. Center for Artificial Intelligence
 
11:30-11:45, Paper WB5.3 Add to My Program
Assessment of Lean Maturity Level in Manufacturing Cells
Maasouman, Mohammad AliConcordia Univ
Demirli, KudretKhalifa Univ. of Science, Tech. and Res
 
11:45-12:00, Paper WB5.4 Add to My Program
Operating Strategies for In-Plant Milk-Run Systems
Klenk, EvaInst. for Materials Handling, Material Flow, Logistics, Tech
Galka, StefanInst. for Materials Handling, Material Flow, Logistics, Tech
Guenthner, Willibald A.Inst. for Materials Handling, Material Flow, Logistics, Tech
 
12:00-12:15, Paper WB5.5 Add to My Program
Tool Wear Improvement in Face-Hobbing of Bevel Gears by Re-Designing the Cutting Blades
Habibi, MohsenConcordia Univ
Chen, ChevyConcordia Univ
Fang, ZixiConcordia Univ
 
WB6 Invited Session, 213 Add to My Program 
Multimodal Data and Processes Management  
 
Chair: Tsuzuki, Marcos de Sales GuerraUniv. of Sao Paulo
Co-Chair: Zaremba, Marek B.Univ. of Quebec
 
11:00-11:15, Paper WB6.1 Add to My Program
Development of Business Spatial Analysis Tools: Methodology and Framework
Daras, GautierEc. Pol. De Montreal
Agard, BrunoPol. De Montreal
Cambazard, HadrienG-SCOP, Univ. De Grenoble
Penz, BernardGrenoble-INP / UJF-Grenoble 1 / CNRS, G-SCOP UMR5272 Grenoble
 
11:15-11:30, Paper WB6.2 Add to My Program
Development of a Complete Methodology to Reconstruct, Optimize, Analyze and Visualize Francis Turbine Runners (I)
Tsuzuki, Marcos de Sales GuerraUniv. of Sao Paulo
Vatanabe, SandroEscola Pol. Da Univ. De Sao Paulo
Castro, Emiliano GonçalvesEscola Pol. Da Univ. De Sao Paulo
Silva, Emilio Carlos NelliEscola Pol. Da Univ. De Sao Paulo
Martins, Thiago de CastroUniv. of Sao Paulo
Taniguchi, DenisAdoca Informatica Ltda
Makiyama, HumbertoAdoca Informatica Ltda
Sato, Andre KubagawaEscola Pol. Da Univ. De Sao Paulo
Gallo, Giulliano B.CESP
Garcia, Marcos A. A.CESP
Tiba, HamiltonCESP
 
11:30-11:45, Paper WB6.3 Add to My Program
Mathematical Modeling of Retrieval Travel Time for Flow-Rack Automated Storage and Retrieval Systems (I)
Ghomri, LatéfaAbou-Bekr Belkaïd Univ. - Tlemcen
Sari, ZakiUniv. of Tlemcen
 
11:45-12:00, Paper WB6.4 Add to My Program
Intelligent Manufacturing System Conguration and Optimization Considering Mobiles Robots, Multi-Functional Machines and Human Operators: New Facilities and Challenge for Industrial Engineering (I)
Baboli, ArmandINSA-Lyon, DISP Lab. F-69621, France
Okamoto Jr, JunEscola Pol. Da Univ. De São Paulo, Department of M
Tsuzuki, Marcos de Sales GuerraUniv. of Sao Paulo
Martins, Thiago de CastroUniv. of Sao Paulo
Miyagi, Paulo EigiUniv. of Sao Paulo, Escola Pol
Junqueira, FabrícioEscola Pol. Univ. of São Paulo
 
12:00-12:15, Paper WB6.5 Add to My Program
Automated Modelling of Multimodal Data Processes in Remote Sensing (I)
Davila, Juan CarlosUQO
Zaremba, Marek B.Univ. of Quebec
 
WB8 Special Session, 215 Add to My Program 
System Identification for Manufacturing Control Applications - II  
 
Chair: Nagesh, IndiraUniv. of Warwick
Co-Chair: Paulina, Golinska-DawsonPoznan Univ. of Tech
 
11:00-11:15, Paper WB8.1 Add to My Program
Sliding Mode Observers for Plasma Signal Identification in Remote Laser Welding
Nagesh, IndiraUniv. of Warwick
Agyapong-Kodua, KwabenaUniv. of Warwick
 
11:15-11:30, Paper WB8.2 Add to My Program
Constraint Conditions Determination for Singularity-Free Workspace of Central Symmetric Parallel Robots (I)
Zeng, RuiBeihang Univ
Dai, ShulingSchool of Automation Science and Electrical Engineering, Beihang
Xie, WenfangConcordia Univ
Bhat, RamaConcordia Univ. Montreal, Canada
 
11:30-11:45, Paper WB8.3 Add to My Program
Dynamic Model Identification of Axial Force in Robotic Friction Stir Welding (I)
Wang, KeArts Et Métiers ParisTech
Leonard, FrancoisENIM
Abba, GabrielEc. Nationale Supérieure Des Arts Et Métiers
 
WC1 Regular Session, 209 Add to My Program 
Project Management and Scheduling  
 
Chair: Boctor, FayezUniv. Laval
Co-Chair: Gebennini, ElisaUniv. Di Modena E Reggio Emilia
 
13:45-14:05, Paper WC1.1 Add to My Program
A Fuzzy-Logic Based Resource Levelling Optimisation Tool (I)
Iyer, ParthUniv. of Calgary
Brennan, RobertUniv. of Calgary
 
14:05-14:25, Paper WC1.2 Add to My Program
Assessment of Makespan Performance for Flexible Process Plans in Job Shop Scheduling
Phanden, Rakesh KumarRes. Scholar
Jain, AjaiProfessor
 
14:25-14:45, Paper WC1.3 Add to My Program
Production Scheduling to Optimize the Product Assortment in Case of Constrained Capacity and Customer-Driven Substitution
Gebennini, ElisaUniv. Di Modena E Reggio Emilia
Zeppetella, LucaUniv. Di Modena E Reggio Emilia
Grassi, AndreaUniv. Di Modena E Reggio Emilia
Rimini, BiancaUniv. Di Modena E Reggio Emilia
 
14:45-15:05, Paper WC1.4 Add to My Program
Robust Approach for Centralized Job Shop Scheduling : Sequential Flexibility
Ourari, SamiaCentre De Développement Des Tech. Avancées
 
15:05-15:25, Paper WC1.5 Add to My Program
An Effective Approach for the Scheduling of Refining Process with Uncertain Iterations in Steel-Making and Continuous Casting Process
Liangliang, SunShenyang Jianzhu Univ
Luan, FangjunShenyang Jianzhu Univ
Pian, JinxiangShenyang Jianzhu Univ
 
WC2 Invited Session, 210 Add to My Program 
Modeling and Control of Physical Internet Enabled Interconnected Logistics  
 
Chair: Sallez, YvesUniv. of Valenciennes
Co-Chair: Pan, ShenleMINES ParisTech, PSL Res. Univ
 
13:45-14:05, Paper WC2.1 Add to My Program
Avoiding Fragmentation in Miniload Automated Storage and Retrieval Systems
Tokola, Henri AlfredAalto Univ
Niemi, EskoAalto Univ
 
14:05-14:25, Paper WC2.2 Add to My Program
Proposition of a Hybrid Control Architecture for the Routing in a Physical Internet Cross-Docking Hub (I)
Sallez, YvesUniv. of Valenciennes
Berger, ThierryUniv. of Valenciennes
Bonte, ThereseUniv. of Valenciennes
Trentesaux, DamienUniv. of Valenciennes
 
14:25-14:45, Paper WC2.3 Add to My Program
A Crowdsourcing Solution to Collect E-Commerce Reverse Flows in Metropolitan Areas (I)
Pan, ShenleMINES ParisTech, PSL Res. Univ
Chen, ChaoSchool of Computer Science, Chongqing Univ
Zhong, RunyangDepartment of Industry and Manufacturing Systems Engineering, Th
 
14:45-15:05, Paper WC2.4 Add to My Program
A Model to Take Advantage of Physical Internet for Vendor Inventory Management (I)
Yang, YanyanMINES ParisTech
Pan, ShenleMINES ParisTech, PSL Res. Univ
Ballot, EricMines ParisTech
 
15:05-15:25, Paper WC2.5 Add to My Program
Optimizing Consumer Order Delivery Consolidation in Drop-Ship Based B2C Distribution (I)
Naccache, SalmaFaculté Des Sciences De L'administration, Univ. Laval
Montreuil, BenoitFaculté Des Sciences De L'administration, Univ. Laval
 
WC3 Invited Session, 211 Add to My Program 
Assembly Line Balancing and Scheduling Problems - I  
 
Chair: Dolgui, AlexandreEc. Nationale Supérieure Des Mines De Saint-Etienne
Co-Chair: Delorme, XavierEc. Nationale Supérieure Des Mines De Saint-Etienne
 
13:45-14:05, Paper WC3.1 Add to My Program
The Assembly Line Balancing Problem with Task Splitting: A Case Study (I)
Grzechca, WaldemarThe Silesian Univ. of Tech
Foulds, LesFederal Univ. of Goias
 
14:05-14:25, Paper WC3.2 Add to My Program
Estimating Processing Times within Context-Aware Manufacturing Systems (I)
Ringsquandl, MartinLudwig-Maximilians Univ. München
Lamparter, SteffenSiemens AG
Lepratti, RaffaelloSiemens AG
 
14:25-14:45, Paper WC3.3 Add to My Program
On Periodicity of Cycle Time of a U-Shaped Line in Chase Mode (I)
Nakade, KoichiNagoya Inst. of Tech
 
14:45-15:05, Paper WC3.4 Add to My Program
Production and Setup Policy Optimization for Hybrid Manufacturing-Remanufacturing Systems (I)
Polotski, VladimirEc. De Tech. Superieure
Kenné, Jean-PierreÉcole De Tech. Supérieure
Gharbi, AliÉcole De Tech. Supérieure
 
15:05-15:25, Paper WC3.5 Add to My Program
Bin Packing Problem with General Precedence Constraints (I)
Dell'Amico, MauroUNIMORE
 
15:25-15:45, Paper WC3.6 Add to My Program
Coping with Model Variations on Parallel U-Shaped Assembly Line Configurations (I)
Kucukkoc, IbrahimUniv. of Exeter
Zhang, ZhengwenExeter
 
WC4 Invited Session, 212 Add to My Program 
Supply Network Dynamics, Disruption Management, and Control - I  
 
Chair: Koplyay, TamasUniv. Du Québec En Outaouais
Co-Chair: Zhong, RunyangDepartment of Industry and Manufacturing Systems Engineering, the Univ. of Hong Kong
 
13:45-14:05, Paper WC4.1 Add to My Program
A Simulation Model of a Three Echelon Supply Chain System with Multiple Suppliers Subject to Supply and Transportation Disruptions (I)
Hishamuddin, HawaUniv. Kebangsaan Malaysia (UKM)
Sarker, Ruhul AminUniv. of New South Wales
Essam, DarylUNSW
 
14:05-14:25, Paper WC4.2 Add to My Program
A Neighborhood Search for a Multi-Size Container Transportation Problem (I)
Funke, JuliaChair of Logistics, Univ. of Bremen, 28359 Bremen
Kopfer, HerbertUniv. of Bremen
 
14:25-14:45, Paper WC4.3 Add to My Program
Applying Bond Graphs for Modelling the Manufacturing Dynamics (I)
Sagawa, JulianaFederal Univ. of São Carlos
Nagano, MarceloUniv. of São Paulo - School of Engineering of São Carlos
 
14:45-15:05, Paper WC4.4 Add to My Program
Modeling the Supply Chain Disruptions: A Study Based on the Supply Chain Interdependencies
Blos, Mauricio F.Pol. School of the Univ. of São Paulo
Miyagi, Paulo EigiUniv. of Sao Paulo, Escola Pol
 
15:05-15:25, Paper WC4.5 Add to My Program
Synchronizing and Improving Supply Chains through the Application of Cyber-Physical Systems
Frazzon, Enzo MorosiniFederal Univ. of Santa Catarina
de Souza Silva, LucasFederal Univ. of Santa Catarina
Hurtado, Paula AndreaFederal Univ. of Santa Catarina
 
WC5 Invited Session, 104 Add to My Program 
Evolvable and Adaptive Manufacturing Systems  
 
Chair: Sanderson, DavidUniv. of Nottingham
Co-Chair: Zhang, JiayiUniv. of Warwick
 
13:45-14:05, Paper WC5.1 Add to My Program
Evolvable Assembly Systems: A Distributed Architecture for Intelligent Manufacturing (I)
Chaplin, Jack ChristopherUniv. of Nottingham
Bakker, Otto JanThe Univ. of Nottingham
de Silva, LavindraThe Univ. of Nottingham
Sanderson, DavidUniv. of Nottingham
Kelly, EmmaUniv. of Nottingham
Logan, BrianUniv. of Nottingham
Ratchev, SvetanUniv. of Nottingham
 
14:05-14:25, Paper WC5.2 Add to My Program
Self-Organising Electronic Institutions and Flexible Manufacturing Systems (I)
Sanderson, DavidUniv. of Nottingham
Ratchev, SvetanUniv. of Nottingham
Kelly, EmmaUniv. of Nottingham
Busquets, DidacImperial Coll. London
Pitt, JeremyImperial Coll. London
 
14:25-14:45, Paper WC5.3 Add to My Program
Towards a Capability-Based Framework for Reconfiguring Industrial Production Systems (I)
Antzoulatos, NikolasUniv. of Nottingham
Rocha, AndréCts, Uninova
Castro, ElkinUniv. of Nottingham
de Silva, LavindraThe Univ. of Nottingham
Santos, TiagoCts, Uninova
Ratchev, SvetanUniv. of Nottingham
Barata, JoseUniv. Nova De Lisboa
 
14:45-15:05, Paper WC5.4 Add to My Program
Automated Experience-Based Learning for Plug and Produce Assembly Systems (I)
Scrimieri, DanieleUniv. of Nottingham
Antzoulatos, NikolasUniv. of Nottingham
Castro, ElkinUniv. of Nottingham
Ratchev, SvetanUniv. of Nottingham
 
15:05-15:25, Paper WC5.5 Add to My Program
Towards a Condition-Monitoring Framework for Quality Assurance in a Intelligent Single And/or Multistage Manufacturing Environment (I)
Bakker, Otto JanThe Univ. of Nottingham
Ratchev, SvetanUniv. of Nottingham
Popov, AtanasUniv. of Nottingham
 
15:25-15:45, Paper WC5.6 Add to My Program
Integrated Ontologies in Support of Factory Systems Design (I)
Zhang, JiayiUniv. of Warwick
Agyapong-Kodua, KwabenaUniv. of Warwick
 
WC6 Invited Session, 213 Add to My Program 
Multimodal Networks Modeling and Design  
 
Chair: Banaszak, ZbigniewWarsaw Univ. of Tech
Co-Chair: Baboli, ArmandINSA-Lyon, DISP Lab. F-69621, France
 
13:45-14:05, Paper WC6.1 Add to My Program
Multimodal Processes Prototyping Subject to Fuzzy Operation Time Constraints (I)
Bocewicz, GrzegorzKoszalin Univ. of Tech
Banaszak, ZbigniewWarsaw Univ. of Tech
Nielsen, IzabelaAalborg Univ
 
14:05-14:25, Paper WC6.2 Add to My Program
Task Allocation in Robot Systems with Multi-Modal Capabilities (I)
Hojda, MaciejWroclaw Univ. of Tech
 
14:25-14:45, Paper WC6.3 Add to My Program
A Novel Approach to Decision Support and Optimization of Group Job Handling for Multimodal Processes in Manufacturing and Services (I)
Sitek, PawelKielce Univ. of Tech
Wikarek, JaroslawKielce Univ. of Tech
 
14:45-15:05, Paper WC6.4 Add to My Program
Multidimensional Approach to the Supply Chain (I)
Hoffa, PatrycjaPoznan Univ. of Tech
Jasiulewicz-Kaczmarek, MalgorzataPoznan Univ. of Tech
Pawlewski, PawelPoznan Univ. of Tech
 
15:05-15:25, Paper WC6.5 Add to My Program
Asynchronous Multimodal Process Approach to Cross-Docking Hub Optimization (I)
Pawlewski, PawelPoznan Univ. of Tech
 
15:25-15:45, Paper WC6.6 Add to My Program
Multimodal Approach for Modelling of the Materials Flow in Remanufacturing Process (I)
Paulina, Golinska-DawsonPoznan Univ. of Tech
Pawlewski, PawelPoznan Univ. of Tech
 
WC7 Invited Session, 214 Add to My Program 
Maintenance and Production Control under Leasing, Warranty, and
Subcontracting Constraints
 
 
Chair: Rezg, NidhalMetz Univ
Co-Chair: Ait-Kadi, DaoudLaval Univ
 
13:45-14:05, Paper WC7.1 Add to My Program
Ecological and Joint Optimization of Preventive Maintenance and Spare Parts Inventories for an Optimal Production Plan (I)
Ba, KaderUniv. De Lorraine
Dellagi, SofieneUniv. De Metz
Rezg, NidhalMetz Univ
Erray, WalidArcelorMittal MaizièRes. Res. SA
 
14:05-14:25, Paper WC7.2 Add to My Program
Perturbation Analysis for Optimal Production Planning of a Manufacturing System with Subcontracting and Machine Degradation (I)
Ayed, SouheilMetz Univ
Turki, SadokUniv. De Lorraine
Hajej, ZiedUniv. De Metz
 
14:25-14:45, Paper WC7.3 Add to My Program
Performance Evaluation of a Hybrid Manufacturing Remanufacturing System Taking into Account the Machine Degradation (I)
Turki, SadokUniv. De Lorraine
Hajej, ZiedUniv. De Metz
Rezg, NidhalMetz Univ
 
14:45-15:05, Paper WC7.4 Add to My Program
On Reliability Improvement of Second-Hand Products (I)
Darghouth, Mohamed NoomaneLaval Univ
Chelbi, AnisEc. Supérieure Des Sciences Et Tech. De Tunis
Ait-Kadi, DaoudLaval Univ
 
15:05-15:25, Paper WC7.5 Add to My Program
Generalized Reliability Models and Preventive Maintenance Policy for Systems Subject to Competing Dependent Failure Processes (I)
Tlili, LazharUniv. of Tunis, Ec. Supérieure Dessciencesettechniques De
Radhoui, MehdiOf Carthage, Ec. Supérieure De Tech. Etd’informatique, C
Chelbi, AnisEc. Supérieure Des Sciences Et Tech. De Tunis
Rezg, NidhalMetz Univ
 
15:25-15:45, Paper WC7.6 Add to My Program
An Optimal Maintenance Policy for a Two-Unit Production System Using a Proportional Hazards Model
Jafari, LeilaUniv. of Toronto
Naderkhani, FarnooshUniv. of Toronto
Makis, ViliamUniv. of Toronto
 
WC8 Regular Session, 215 Add to My Program 
Control Theory and Applications  
 
Chair: Ponce, PedroITESM-CCM
Co-Chair: Suleiman, WaelUniv. De Sherbrooke
 
14:05-14:25, Paper WC8.2 Add to My Program
Robust Decentralized Control of a Fully Actuated Robot Hand
Grossard, MathieuCea List
 
14:25-14:45, Paper WC8.3 Add to My Program
A Traffic Signal Control Policy for Emergency Vehicles Preemption Using Timed Petri Nets
Huang, Yi-ShengNational Ilan Univ
Jang-Yi Shiue, Jang-YiNational Ilan Univ
Luo, JiliangHuaqiao Univ
 
14:45-15:05, Paper WC8.4 Add to My Program
Supervisory Control Based on Behavioral Constraints Using a Class of Linear Inequalities
Núñez, AlexanderCentro De Investigación Y Estudios Avanzados Del IPN
Sanchez, ArturoCentro De Investigacion Y Estudios Avanzados
 
15:05-15:25, Paper WC8.5 Add to My Program
Interval Type 2 Fuzzy Logic Controller for Rotor Voltage of a Doubly-Fed Induction Generator and Pitch Angle of Wind Turbine Blades
Villanueva, Iván SalvadorInst. Tecnológico Y De Estudios Superiores De Monterrey Camp
Ponce, PedroITESM-CCM
Molina, ArturoTecnologico De Monterrey
 
15:25-15:45, Paper WC8.6 Add to My Program
Experimental Study for Fpga Pid Position Controller in Cnc Micro-Machines
Ponce, PedroITESM-CCM
Molina, ArturoTecnologico De Monterrey
Tello-Albarran, GuillermoITESM
Ibarra, LuisITESM-CCM
MacCleery, BrianNational Inst
Ramírez-Cadena, MiguelTecnológico De Monterrey (ITESM)
 
WD1 Regular Session, 209 Add to My Program 
Intelligent Enterprise and Supply Chain  
 
Chair: Shen, WeimingNational Res. Council
Co-Chair: Whitman, LawrenceWichita State Univ
 
16:00-16:15, Paper WD1.1 Add to My Program
Matching Service Providers and Customers in Two-Sided Dynamic Markets (I)
Xu, XinkaiConcordia Univ
Wang, ChunConcordia Univ
Zeng, YongConcordia Univ
Deng, XiaoguangConcordia Univ
Wang, HansongConcordia Univ
Barklon, DaniilProship Entertainment Inc
Thibault, DanielProship Entertainment Inc
 
16:15-16:30, Paper WD1.2 Add to My Program
An Adaptive Process Planning Method Based on Features and Intelligent Agents for the Manufacturing of Large-Scale Parts (I)
Liu, ChangqingColl. of Mechanical and Electrical Engineering, Nanjing Univ
Li, YingguangNanjing Univ. of Aeronautics and Astronautics
Shao, WenyaoColl. of Mechanical and Electrical Engineering, Nanjing Univ
Shen, WeimingNational Res. Council
 
16:30-16:45, Paper WD1.3 Add to My Program
Aligning Enterprise Analytics to Business Process Capability Maturity (I)
Whitman, LawrenceWichita State Univ
Huffman, JohnSpirit Aerosystems
 
16:45-17:00, Paper WD1.4 Add to My Program
Investigating the Impact of Short Food Supply Chain on Emigration: A Study of Valencia Community in Spain
Falguieres, MaelleBristol Business School, Univ. of the West of England
Kumar, VikasBristol Business School, Univ. of the West of England
Garza-Reyes, Jose ArturoCentre for Supply Chain Improvement, the Univ. of Derby
Kumari, ArchanaBristol Business School, Univ. of the West of England
Ming K., LimCentre for Supply Chain Improvement, the Univ. of Derby
Rocha-Lona, LuisBusiness School, National Pol. Inst. of Mexico
 
17:00-17:15, Paper WD1.5 Add to My Program
Robustness Comparison of Three Dual-Channel Supply Chain Structures under Demand Disruptions
Yang, TianjianBeijing Univ. of Posts and Telecommunications
Wu, BingBeijing Univ. of Posts and Telecommunications
 
WD2 , 210 Add to My Program 
Future Internet-Based Enterprise  
 
Chair: Romero, DavidTecnológico De Monterrey
Co-Chair: Chen, DavidUniv. Bordeaux I
 
16:00-16:15, Paper WD2.1 Add to My Program
Requirements Authoring and Verification for SMEs’ Information Systems Engineering (I)
Amokrane, NawelEc. Des Mines D'alès
Chapurlat, VincentEc. Des Mines D'alès
Courbis, Anne-LiseLGI2P - Ec. Des Mines D'alès
Lambolais, ThomasEc. Des Mines D'alès
Rahhou, MohssineEc. Des Mines D'alès
 
16:15-16:30, Paper WD2.2 Add to My Program
Framework for Manufacturing Servitization in Virtual Enterprise Environment and Ecosystem (I)
Chen, DavidUniv. Bordeaux I
 
16:30-16:45, Paper WD2.3 Add to My Program
A Holistic Model of Building Innovation Ecosystems (I)
Rabelo, RicardoFederal Univ. of Santa Catarina
Bernus, PeterGriffith Univ
 
16:45-17:00, Paper WD2.4 Add to My Program
Green Virtual Enterprises and Their Breeding Environments: Engineering Their Sustainability As Systems of Systems for the Circular Economy (I)
Romero, DavidTecnológico De Monterrey
Noran, OvidiuGriffith Univ
 
17:00-17:15, Paper WD2.5 Add to My Program
Datacenter Location for Internet Services in the Province of Quebec
Ounifi, Hibat AllahEc. De Tech. Supérieure (ÉTS)
Ouhimmou, MustaphaÉcole De Tech. Supérieure
Paquet, MarcEc. De Tech. Superieure
Montecinos, JulioÉcole De Tech. Supérieure (ÉTS)
 
17:15-17:30, Paper WD2.6 Add to My Program
Scheduling Heuristic Resourced-Based on Task Time Windows for APS (Advanced Planning and Scheduling) Systems
Estombelo Montesco, Richard AFederal Univ. of Sergipe
Pessoa, Marcosiris Amorim de OliveiraUniv. of Sao Paulo
Blos, Mauricio F.Pol. School of the Univ. of São Paulo
 
WD3 Invited Session, 211 Add to My Program 
Assembly Line Balancing and Scheduling Problems - II  
 
Chair: Dolgui, AlexandreEc. Nationale Supérieure Des Mines De Saint-Etienne
Co-Chair: Delorme, XavierEc. Nationale Supérieure Des Mines De Saint-Etienne
 
16:00-16:15, Paper WD3.1 Add to My Program
Minimizing the Number of Workers for One Cycle of a Paced Production Line (I)
Dolgui, AlexandreEc. Nationale Supérieure Des Mines De Saint-Etienne
Kovalev, SergeyEc. Nationale Supérieure Des Mines De Saint-Etienne
Kovalyov, Mikhail Y.United Inst. of Informatics Problems
Malyutin, SergeyEc. Nationale Supérieure Des Mines De Saint-Etienne
Soukhal, AmeurUniv. of Tours, France
 
16:15-16:30, Paper WD3.2 Add to My Program
A Software Platform for the Multi-Objective Early-Stage Design of Automotive Assembly Lines (I)
Colledani, MarcelloPol. Di Milano
Ratti, AndreaPol. Di Milano
Franchini, FrancescoEnginesoft
Taurisano, AntonioEnginesoft
Micchetti, FrancescoEnginesoft
 
16:30-16:45, Paper WD3.3 Add to My Program
A Mathematical Programming Formulation for Cost-Oriented Multi-Manned Assembly Line Balancing Problem
Roshani, AbdolrezaUniv. of Genova
Giglio, DavideUniv. of Genova
 
16:45-17:00, Paper WD3.4 Add to My Program
A Simulated Annealing Approach for Multi-Manned Assembly Line Balancing Problem Type II
Roshani, AbdolrezaUniv. of Genova
Giglio, DavideUniv. of Genova
 
17:00-17:15, Paper WD3.5 Add to My Program
Production Line Balancing with Discrete Event Simulation: A Case Study
Zupan, HugoUniv. of Ljubljana, Faculty of Mechanical Engineering
Herakovic, NikoUniv. of Ljubljana
 
17:15-17:30, Paper WD3.6 Add to My Program
Robust Production Planning and Capacity Control for Flexible Assembly Lines
Gyulai, DávidFraunhofer Project Center, SZTAKI
Monostori, LaszloFraunhofer Project Center, SZTAKI
Kadar, BotondFraunhofer Project Center, SZTAKI
 
WD5 Invited Session, 104 Add to My Program 
Advances on Additive Manufacturing  
 
Chair: Tsuzuki, Marcos de Sales GuerraUniv. of Sao Paulo
Co-Chair: Barari, AhmadUniv. of Ontario Inst. of Tech
 
16:00-16:15, Paper WD5.1 Add to My Program
Additive Manufacturing of Metal Parts by Welding (I)
Rodrigo Juliano, SilvaUniv. of Sao Paulo
Franco Barbosa, GustavoUniv. of Sao Paulo
Carvalho, Jonas deUniv. of S. Paulo
 
16:15-16:30, Paper WD5.2 Add to My Program
Controlling Cavity Structure for Printing Natural Objects (I)
Michikawa, TakashiOsaka Univ
Suzuki, HiromasaThe Univ. of Tokyo
 
16:30-16:45, Paper WD5.3 Add to My Program
Development Considerations for an Additive Manufacturing CAM System (I)
Hedrick, Robert WilliamCAMufacturing Solutions Inc
Urbanic, Ruth JillUniv. of Windsor
Burford, Christopher GeorgeCamufacturing Solutions Inc
 
16:45-17:00, Paper WD5.4 Add to My Program
Topologically Optimized Diesel Engine Support Manufactured with Additive Manufacturing (I)
Marchesi, TadeusEscola Pol. Da USP
Lahuerta, RicardoEscola Pol. Da USP
Silva, Emilio Carlos NelliEscola Pol. Da Univ. De Sao Paulo
Tsuzuki, Marcos de Sales GuerraUniv. of Sao Paulo
Martins, Thiago de CastroUniv. of Sao Paulo
Barari, AhmadUniv. of Ontario Inst. of Tech
Wood, IanUniv. of Ontario Inst. of Tech
 
17:00-17:15, Paper WD5.5 Add to My Program
A Genetic Programming Approach to Model Detailed Surface Integrity of Additive Manufacturing Parts (I)
Barari, AhmadUniv. of Ontario Inst. of Tech
Jamiolahmadi, SaeedUniv. of Ontario Inst. of Tech
 
17:15-17:30, Paper WD5.6 Add to My Program
Provenance in the Additive Manufacturing Process (I)
Fadhel, NawfalElectronic and Computer Science, Univ. of Southampton
Crowder, RichardUniv. of Southampton, Southampton
Wills, GaryElectronic and Computer Science, Univ. of Southampton
 
WD6 Invited Session, 213 Add to My Program 
Innovative Networks for Smart City Logistics  
 
Chair: Bogataj, MarijaMediterranean Inst. for Advanced Studies
Co-Chair: Mossa, GiorgioPol. of Bari
 
16:00-16:15, Paper WD6.1 Add to My Program
Cooperative Driving Experiments Based on a 3D Components Environment (I)
Colmenares, GiancarloUniv. Nacional Experimental Del Táchira
Benyahia, IlhamUniv. Du Québec En Outaouais
 
16:15-16:30, Paper WD6.2 Add to My Program
A Cyber – Based DSS for a Low Carbon Integrated Waste Management System in a Smart City (I)
Digiesi, SalvatorePol. of Bari
Facchini, FrancescoPol. Di Bari
Mossa, GiorgioPol. of Bari
Mummolo, GiovanniPol. of Bari
Verriello, RossellaPol. Di Bari
 
16:30-16:45, Paper WD6.3 Add to My Program
Optimal Allocation of Public Service Centres in the Central Places of Functional Regions (I)
Drobne, SamoUniv. of Ljubljana, Faculty of Civil and Geodetic Engineeri
Bogataj, MarijaMediterranean Inst. for Advanced Studies
 
16:45-17:00, Paper WD6.4 Add to My Program
Urban Freight Distribution: The Impact of Delivery Time on Sustainability
Moutaoukil, AbdelhamidEc. Des Mines of Saint-Etienne
Neubert, GillesEMLyon Business School - Lab EVS, UMR 5600
Derrouiche, RidhaESC-School of Management of Saint-Etienne
 
17:00-17:15, Paper WD6.5 Add to My Program
An Optimal Ordering Cycle at Interactions of Fuzzy Parameters and High Disposal Fees of Food or Drug Supply Systems (I)
Bogataj, MarijaMediterranean Inst. for Advanced Studies
Tuljak-Suban, DanijelaUniv. OF LJUBLJANA, Faculty of Maritime Studies and Transpo
 
WD7 Special Session, 214 Add to My Program 
Integration of Quality and Production Controls  
 
Chair: Colledani, MarcelloPol. Di Milano
Co-Chair: Bassetto, SamuelPol. Montreal
 
16:00-16:15, Paper WD7.1 Add to My Program
Multidimensional Analyses of Manufacturing Processes: Process Capability within the Case Study Shape Drill Manufacturing (I)
Bracke, StefanUniv. of Wuppertal
Backes, BiancaUniv. of Wuppertal
 
16:15-16:30, Paper WD7.2 Add to My Program
Towards Lean and Resilient Production (I)
Puchkova, AlenaUniv. of Cambridge
Srinivasan, RengarajanUniv. of Cambridge
McFarlane, Duncan CampbellUniv. of Cambridge
Thorne, AlanUniv. of Cambridge
 
16:30-16:45, Paper WD7.3 Add to My Program
Real-Time Machine-Vision-System for an Automated Quality Monitoring in Mass Production of Multiaxial Non-Crimp Fabrics
Schmitt, RobertWerkzeugmaschinenlabor WZL
Fürtjes, TobiasRWTH Aachen
Abbas, BahozAssoc. Inst. for Management Cybernetics E.v. (IfU)
Abel, PhilippInst. of Textile Tech. (ITA)
Kimmelmann, WalterLab. for Machine Tools and Production Engineering (WZL)
Kosse, PhilippLab. for Machine Tools and Production Engineering (WZL)
Buratti, AndreaLab. for Machine Tools and Production Engineering (WZL)
 
16:45-17:00, Paper WD7.4 Add to My Program
Lead-Time Oriented Production Control Policies in Two-Machine Production Lines (I)
Angius, AlessioUniv. of Turin, Italy
Colledani, MarcelloPol. Di Milano
Horvath, AndrasUniv. of Turin, Italy
 
WD8 Regular Session, 215 Add to My Program 
Automation and Robotics  
 
Chair: Sasiadek, Jurek ZCarleton Univ
Co-Chair: Crowder, RichardUniv. of Southampton
 
16:00-16:15, Paper WD8.1 Add to My Program
Exogenous Fault Detection and Recovery for Swarm Robotics
Khadidos, AdilUniv. of Southampton
Crowder, RichardUniv. of Southampton
Chappell, Paul HUniv. of Southampton
 
16:15-16:30, Paper WD8.2 Add to My Program
Bayesian Network Building for Diagnosis in Industrial Domain Based on Expert Knowledge and Unitary Traceability Data
Diallo, Thierno M.L.DISP Lab. Univ. of Lyon 1
Henry, SébastienDISP Lab. Univ. of Lyon, Univ. Lyon 1
Ouzrout, YacineDISP Lab. Univ. of Lyon, Univ. Lyon 2
 
16:30-16:45, Paper WD8.3 Add to My Program
Towards Mixed Reality in SCADA Applications
Soete, NicolasUGent
Claeys, ArnoGhent Univ
Hoedt, StevenUGhent
Mahy, BenSagility
Cottyn, JohannesGhent Univ
 
16:45-17:00, Paper WD8.4 Add to My Program
A Learning-Based Approach for Automatic Defect Detection in Textile Images
Daniel, YapiUniv. Du Québec En Outaouais
Mejri, MaroueneUQO
Allili, Mohand SaidUQO
Nadia, BaazizUniv. Du Québec En Outaouais
 
17:00-17:15, Paper WD8.5 Add to My Program
Robust QFT-Based Control of DTC-Speed Loop of an Induction Motor under Different Load Conditions
Ibarra, LuisITESM-CCM
Ponce, PedroITESM-CCM
Molina, ArturoTecnologico De Monterrey
 
17:15-17:30, Paper WD8.6 Add to My Program
Experimental Fuzzy Logic Controller Type 2 for a Quadrotor Optimized by ANFIS
Ponce, PedroITESM-CCM
Molina, ArturoTecnologico De Monterrey

 
 

 
 

 

Technical Content © IFAC

This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2017 PaperCept, Inc.
Page generated 2017-09-25  00:19:01 PST  Terms of use