Program at a Glance    Wednesday    Thursday    Friday    Author Index    Keyword Index    My Program  

Last updated on August 23, 2019. This conference program is tentative and subject to change

Technical Program for Thursday August 29, 2019

To show or hide the keywords and abstract of a paper (if available), click on the paper title
Open all abstracts   Close all abstracts
 
ThAT1 Open Invited Track, 001 Add to My Program 
Intelligent Methods and Systems Supporting Supply Chain Decision Making - I  
 
Chair: Frazzon, Enzo MorosiniFederal University of Santa Catarina
Co-Chair: Freitag, MichaelUniversity of Bremen
 
08:30-08:52, Paper ThAT1.1 Add to My Program
Big Data Application for E-Commerce's Logistics: A Research Assessment and Conceptual Model (I)
Hurtado, Paula AndreaFederal University of Santa Catarina
Frazzon, Enzo MorosiniFederal University of Santa Catarina
Dorneles, CarinaUniversidade Federal De Santa Catarina
 
08:52-09:14, Paper ThAT1.2 Add to My Program
Towards a Predictive Approach for Omni-Channel Retailing Supply Chains (I)
Meireles Pereira, MarinaFederal University of Santa Catarina
Frazzon, Enzo MorosiniFederal University of Santa Catarina
 
09:14-09:36, Paper ThAT1.3 Add to My Program
Using Data Mining Techniques to Investigate the Correlation between Surface Cracks and Flange Lengths in Deep Drawn Sheet Metals (I)
Heger, JensLeuphana University of Lüneburg
Zein El Abdine, MazharLeuphana University of Lüneburg, Institute of Product and Proces
 
09:36-09:58, Paper ThAT1.4 Add to My Program
Indoor Positioning in Car Parks by Using Wi-Fi Round-Trip-Time to Support Finished Vehicle Logistics on Port Terminals (I)
Jathe, NicolasBIBA - Bremer Institut Für Produktion Und Logistik GmbH
Lütjen, MichaelBIBA - Bremer Institut Für Produktion Und Logistik GmbH at the U
Freitag, MichaelUniversity of Bremen
 
09:58-10:20, Paper ThAT1.5 Add to My Program
Towards a Conceptual Model of Structural and Behavioral Elements in Cyber-Physical Production Systems (I)
Regal da Silva, ThiagoUniversidade Federal Do Rio Grande Do Sul
Pereira, Carlos EduardoFederal Univ. of Rio Grande Do Sul - UFRGS
 
ThAT2 Invited Session, 002 Add to My Program 
Modeling and Algorithms for New Production Modes Combining Service and
Manufacturing under Uncertain Environments
 
 
Chair: Liu, XinTongji University
Co-Chair: Yang, XuenanTongji University
 
08:30-08:52, Paper ThAT2.1 Add to My Program
Risk Level-Driven Bi-Objective Stochastic Parallel Machine Scheduling Problem (I)
Liu, MingTongji University
Liu, XinTongji University
 
08:52-09:14, Paper ThAT2.2 Add to My Program
Distributionally Robust Parallel Machine ScheLoc Problem under Service Level Constraints (I)
Liu, MingTongji University
Liu, XinTongji University
 
09:14-09:36, Paper ThAT2.3 Add to My Program
Bi-Objective Optimization of Multiple-Route Job Shop Scheduling with Route Cost (I)
Zheng, FeifengDonghua Univ
Sui, YangDonghua University
 
09:36-09:58, Paper ThAT2.4 Add to My Program
Single Machine Scheduling Considering Time Value of Money (I)
Xu, YinfengDonghua University
Zhi, RongtengDonghua University
Zheng, FeifengDonghua Univ
 
09:58-10:20, Paper ThAT2.5 Add to My Program
Bi-Objective Flexible Job Shop Scheduling with Operation Overlapping Costs (I)
Zheng, FeifengDonghua Univ
Wang, ZhaojieDonghua University
 
ThAT3 Invited Session, 004 Add to My Program 
Bio-Inspired Techniques in Future Manufacturing Enterprise Control  
 
Chair: Dumitrache, IoanUniversity
Co-Chair: Caramihai, Simona IulianaUniversity "Politehnica"of Bucharest
 
08:30-08:52, Paper ThAT3.1 Add to My Program
Rethinking Jidoka Systems under Automation & Learning Perspectives in the Digital Lean Manufacturing World (I)
Romero, DavidTecnológico De Monterrey
Gaiardelli, PaoloUniversity of Bergamo
Powell, Daryl JohnNorwegian University of Science and Technology
Wuest, ThorstenWest Virginia University
Thürer, MatthiasInstitute of Physical Internet, Jinan University
 
08:52-09:14, Paper ThAT3.2 Add to My Program
Lean Thinking Contributions for Industry 4.0: A Systematic Literature Review (I)
Bittencourt, VictorUniversity of Minho
Alves, AnabelaUniversity of Minho
Leão, CelinaUniversity of Minho
 
09:14-09:36, Paper ThAT3.3 Add to My Program
Neuro-Inspired Framework for Cognitive Manufacturing Control (I)
Dumitrache, IoanUniversity
Caramihai, Simona IulianaUniversity "Politehnica"of Bucharest
Moisescu, Mihnea AlexandruUniversity Politehnica Bucharest
Sacala, Ioan StefanUniversity Politehnica Bucharest
 
09:36-09:58, Paper ThAT3.4 Add to My Program
A Self-Adapted Swarm Architecture to Handle Big Data for “factories of the Future” (I)
Guerreiro, GuilhermeUNINOVA Instituto De Desenvolvimento De Novas Tecnologias
Costa, RubenUNINOVA - Instituto De Desenvolvimento De Novas Tecnologias
Figueiras, PauloUNINOVA
Graça, DiogoVolkswagen Autoeuropa
Jardim-Goncalves, RicardoUNINOVA - Instituto De Desenvolvimento De Novas Tecnologias
 
09:58-10:20, Paper ThAT3.5 Add to My Program
Intelligent Control Interfaces Using Extenics Multidimensional Theory Applied on VIPRO Platforms for Developing the IT INDUSTRY 4.0 Concept (I)
Vladareanu, LuigeRomanian Academy, Institute of Solid Mechanics
Vladareanu, Victor"Politehnica" University of Bucharest
Yu, HongnianBournemouth University
Mitroi, DanielInstitute of Solid Mechanics of the Romanian Academy
Ciocirlan, Alexandra-CatalinaInstitute of Solid Mechanics of the Romanian Academy
 
ThAT4 Open Invited Track, 013 Add to My Program 
Cybersecurity of Control and Safety Systems  
 
Chair: Jharko, ElenaV.A. Trapeznikov Institute of Control Sciences
Co-Chair: Promyslov, VitalyV.A. Trapeznikov Institute of Control Sciences
 
08:30-08:52, Paper ThAT4.1 Add to My Program
A Clustering Method of Asset Cybersecurity Classification (I)
Promyslov, VitalyV.A. Trapeznikov Institute of Control Sciences
Semenkov, KirillICS RAS
Shumov, AlexanderICS RAS
 
08:52-09:14, Paper ThAT4.2 Add to My Program
An Approach to Modeling the Decision Support Process of the Security Event and Incident Management Based on Markov Chains (I)
Kotenko, IgorSPIIRAS
Паращук, ИгорьSPIIRAS
 
09:14-09:36, Paper ThAT4.3 Add to My Program
I&C System Availability Assessment Using Upper Bound Delay Estimation (I)
Baybulatov, ArturRAS ICS
Promyslov, Georgy171 School
Shipilov, Dmitrii171 Moscow State School
Poletikin, AlexeyInstitute of Control Sciences
 
09:36-09:58, Paper ThAT4.4 Add to My Program
Approach to Organizing of a Heterogeneous Swarm of Cyber-Physical Devices to Detect Intruders (I)
Vitkova, LidiaSPIIRAS
Desnitsky, VasilySPIIRAS
Chechulin, AndreySPIIRAS
Kotenko, IgorSPIIRAS
 
ThAT5 Open Invited Track, 014 Add to My Program 
Planning and Scheduling of Manufacturing Processes - III  
 
Chair: Guizzi, GuidoUniversity of Naples Federico II
Co-Chair: Druetto, AlessandroUniversità Di Torino
 
08:30-08:52, Paper ThAT5.1 Add to My Program
Algorithms for Locomotives Maintenance Schedule (I)
Lazarev, AlexanderInstitute of Control Sciences, Russian Academy of Sciences
Grishin, EgorInstitute of Control Science of the Russian Academy of Sciences
Galakhov, SemyonInstitute of Control Sciences of Russian Academy of Science
Tarasov, GermanInstitute of Control Sciences, Moscow
 
08:52-09:14, Paper ThAT5.2 Add to My Program
A Genetic Algorithm for Assigning Train Arrival Dates at a Maintenance Centre (I)
Gu, HanyuUniversity of Technology Sydney
Joyce, MarkUGL Unipart
Lam, Hue ChiUniversity of Technology Sydney
Woods, MarkUGL Unipart
Zinder, YakovUniversity of Technology, Sydney
 
09:14-09:36, Paper ThAT5.3 Add to My Program
Heuristic Approaches for Scheduling Manufacturing Tasks While Taking into Account Accumulated Human Fatigue (I)
Berti, NicolaUniversity of Padova
Artigues, ChristianLAAS CNRS
Battaïa, OlgaISAE-SUPAERO
Guillaume, RomainIrit/LGP
Battini, DariaUniversity of Padua
 
09:36-09:58, Paper ThAT5.4 Add to My Program
Column Generation for Minimizing Total Completion Time on a Single Machine with Parallel Batching (I)
Alfieri, AriannaPolitecnico Di Torino
Druetto, AlessandroUniversità Di Torino
Grosso, AndreaUniversità Di Torino
Salassa, FabioDIGEP - Politecnico Di Torino
 
09:58-10:20, Paper ThAT5.5 Add to My Program
An Optimal Policy for the Capacitated Lot Sizing Problem with Financing of the Working Capital Requirement (I)
Gayraud, FabriceEcole Des Mines De Nantes
Lemoine, DavidEcole Des Mines De Nantes
Massonnet, GuillaumeLS2N, IMT Atlantique
 
ThAT6 Invited Session, 015 Add to My Program 
Assembly/Disassembly/Machining Line Design and Balancing under Uncertainty  
 
Chair: Hazir, OncuRennes School of Management
Co-Chair: Lahrichi, YoussefLIMOS CNRS
 
08:30-08:52, Paper ThAT6.1 Add to My Program
A Polynomial Algorithm for Balancing a Sequence of Operations in Reconfigurable Transfer Lines (I)
Lahrichi, YoussefLIMOS CNRS
Grangeon, NathalieBlaise Pascal University
Norre, SylvieUniversité Blaise Pascal Clermont-Ferrand
Deroussi, LaurentBpclermont
 
08:52-09:14, Paper ThAT6.2 Add to My Program
Complete Self-Balancing Realized by Self-Organizing Chasing-Overtaking Production Line (I)
Liao, ShilongLanZhou University of Technology
Li, JingjingFaculty of Economics and Managemen, Lanzhou University of Techno
Chen, QinHarbin Institute of Technology
Xie, XiaoqingLanzhou University of Technology
Shen, FengpingFaculty of Economics and Managemen, Lanzhou University of Techno
 
09:14-09:36, Paper ThAT6.3 Add to My Program
A Review on Robust Assembly Line Balancing Approaches (I)
Hazir, OncuRennes School of Management
Dolgui, AlexandreIMT Atlantique
 
09:36-09:58, Paper ThAT6.4 Add to My Program
Type-1 U-Shaped Assembly Line Balancing under Uncertain Task Time (I)
Li, YuchenBeijing University of Technology
Hu, XiaofengShanghai JiaoTong University
Tang, XiaowenSchool of Economics and Management, Beijing University of Techno
Kucukkoc, IbrahimUniversity of Exeter
 
09:58-10:20, Paper ThAT6.5 Add to My Program
Evolutionary Dynamics of Manufacturer-Buyer Supply Chains under Different Coordination Strategies
Torres, Juan ManuelUniversidad De Los Andes
Torres, FidelUniversidad De Los Andes
 
ThAT7 Regular Session, 016 Add to My Program 
Lean Manufacturing and Quality Management - III  
 
Chair: Meerkov, Semyon M.Univ. of Michigan
Co-Chair: Azevedo, Maria ManuelaINESC TEC
 
08:30-08:52, Paper ThAT7.1 Add to My Program
The (alpha, Beta)-Precise Estimates of MTBF and MTTR: Definitions, Calculations, and Induced Effect on Machine Efficiency Evaluation
Alavian, PooyaUniversity of Michigan
Eun, YongssoonDGIST
Liu, KangUniversity of Michigan
Meerkov, Semyon M.Univ. of Michigan
Zhang, LiangUniversity of Connecticut
 
08:52-09:14, Paper ThAT7.2 Add to My Program
Basic Structure of Lessons Learned Approach to Improve Manufacturing Processes: A Case Study
Bracke, StefanUniversity of Wuppertal
Ulutas, BernaEskisehir Osmangazi University
 
09:14-09:36, Paper ThAT7.3 Add to My Program
Order Acceptance and Scheduling in Direct Digital Manufacturing with Additive Manufacturing (I)
Li, QiangUniversity of Exeter
Zhang, DavidUniversity of Exeter
Kucukkoc, IbrahimUniversity of Exeter
 
09:36-09:58, Paper ThAT7.4 Add to My Program
Determining Production Systems Performance Metrics Considering Machine Downtime
Bula, GustavoUniversidad Nacional De Colombia
Tazi, NacefUniversity of Technology of Troyes
Chatelet, EricUniversité De Technology De Troyes
 
09:58-10:20, Paper ThAT7.5 Add to My Program
An Analysis of Reconfigurability in Different Business Production Strategies
Maganha, IsabelaUniversity of Coimbra
Silva, CristóvãoCEMUC, University of Coimbra
Ferreira, Luis Miguel D.University of Coimbra
 
ThAT8 Invited Session, 017 Add to My Program 
Inventory Control, Replenishment and Lot-Sizing under Demand, Yield or Lead
Time Uncertainties - II
 
 
Chair: Ben Ammar, OussamaIMT Atlantique, Campus De Nantes
Co-Chair: Bettayeb, BelgacemCESI Group, Campus Lille
 
08:30-08:52, Paper ThAT8.1 Add to My Program
Dynamic Inventory Optimization for a Serial Supply Chain with Stochastic and Lead-Time Sensitive Demand (I)
Dziri, ElissaNational Engineering School of Tunis, University of Tunis El Man
Hammami, RamziESC Rennes School of Business
Jemai, ZiedEcole Centrale Paris
 
08:52-09:14, Paper ThAT8.2 Add to My Program
Mathematical Model for Dynamic Suppliers’ Selection Strategy in Multi-Period Supply Planning with Lead-Times Uncertainty (I)
Ben Ammar, OussamaIMT Atlantique, Campus De Nantes
Bettayeb, BelgacemCESI Group, Campus Lille
Dolgui, AlexandreIMT Atlantique
 
09:14-09:36, Paper ThAT8.3 Add to My Program
Introducing a Unique Inventory Control Framework for Centralized VMI and JIT Production (I)
Saad, Sameh MDepartment of Engineering and Mathematics, Faculty of Art, Compu
Bahadori, RaminFaculty of Art, Computing, Engineering and Science , Sheffield H
 
09:36-09:58, Paper ThAT8.4 Add to My Program
A Developed Tabu Search Algorithm for Heterogeneous Fleet Vehicle Routing Problem
Meliani, YoussefUniversity Hassan II, University Paris8
Hani, YasminaUniversite Paris 8
Lissane Elhaq, SaâdUniversity Hassan II, ENSEM
El Mhamedi, AbderrahmanUniversity of Paris8
 
09:58-10:20, Paper ThAT8.5 Add to My Program
Multi-Agent Simulation of the Balanced Main Parameters of the Logistics Centers
Muravev, DmitriP.h.D Candidate, Shanghai Jiao Tong University
Hu, HaoProfessor of the Department of Transportation, Shipping and Logi
Rakhmangulov, AleksandrNosov Magnitogorsk State Technical University
Dai, LeiAssistant Professor of the Department of Transportation, Shippin
 
ThAT9 Invited Session, 018 Add to My Program 
Recent Advances in Integrated Maintenance Modeling and Optimization for
Manufacturing Systems
 
 
Chair: Venkatadri, UdayDalhousie University
Co-Chair: Khatab, AbdelhakimLorraine University/ National School of Engineering
 
08:30-08:52, Paper ThAT9.1 Add to My Program
Joint Optimization of the Selective Maintenance and Repairperson Assignment Problem When Using New and Remanufactured Spare Parts (I)
Khatab, AbdelhakimLorraine University/ National School of Engineering
Diallo, ClaverDalhousie University
Aghezzaf, El-HoussaineGhent University
Venkatadri, UdayDalhousie University
 
08:52-09:14, Paper ThAT9.2 Add to My Program
Dynamic Predictive Maintenance in Industry 4.0 Based on Real Time Information: Case Study in Automotive Industries (I)
Einabadi, BehnamLIRIS Laboratory, INSA Lyon
Baboli, ArmandINSA-Lyon, LIRIS Laboratory, F-69621, France
Ebrahimi, MojtabaFpt Powertrain Technologies France S.a
 
09:14-09:36, Paper ThAT9.3 Add to My Program
Applied Risk Analysis Approaches for Maintenance of Offshore Wind Turbines; a Literature Review (I)
Jamshidi, AfshinUniversité Laval
Jamshidi, FarzadUnivercité Laval
Ait-Kadi, DaoudLaval University
Ramudhin, AmarHULL University
 
09:36-09:58, Paper ThAT9.4 Add to My Program
Developing a Bi-Objective Imperfect Selective Maintenance Optimization Model for Multicomponent Systems (I)
Diallo, ClaverDalhousie University
Khatab, AbdelhakimLorraine University/ National School of Engineering
Venkatadri, UdayDalhousie University
 
ThAT10 Regular Session, 019 Add to My Program 
Control - II  
 
Chair: Sokolov, BorisSPIIRAS
Co-Chair: Moradi, HamedSharif University of Technology
 
08:30-08:52, Paper ThAT10.1 Add to My Program
Control As a Service Architecture to Support Context-Aware Control Application Development
Lyu, MinhuUniversity of Lyon, INSA Lyon
Benfenatki, HindINSA De Lyon
Biennier, FrederiqueINSA-Lyon
Ghodous, ParisaUniversity Lyon 1
 
08:52-09:14, Paper ThAT10.2 Add to My Program
A Systematic Approach on Modeling Refinement and Regression Testing of Real-Time Distributed Systems
Pal, DeepakTallinn University of Technology
Vain, JüriTallinn University of Technology
 
09:14-09:36, Paper ThAT10.3 Add to My Program
Synthesis and Simulation of Biotechnical Position-Force Control System of a Robot Manipulator with Reconfigurable Structure
Rostova, EkaterinaSt. Petersburg Institute for Informatics and Automation of the R
Rostov, NikolaySaint-Petersburg State Polytechnic University
Sobolevsky, VladislavSt. Petersburg Institute for Informatics and Automation of The
 
09:36-09:58, Paper ThAT10.4 Add to My Program
Control of the Underactuated Gantry Crane for the Block Erection Operation in the Shipyard
Lee, Hye-WonSeoul National University
Roh, Myung-IlSeoul National University
Ham, Seung-HoSeoul National University
 
09:58-10:20, Paper ThAT10.5 Add to My Program
Robust Control of Regenerative Chatter in Uncertain Milling Process with Weak Nonlinear Cutting Forces: A Comparison with Linear Model
Moradi, HamedSharif University of Technology
Nouriani, AliSharif University of Technology
Vossoughi, GholamrezaSharif University of Technology
 
ThAT11 Regular Session, 020 Add to My Program 
Or Applications - II  
 
Chair: Zheng, MeimeiShanghai Jiao Tong University
Co-Chair: Liu, XiaoShanghai Jiao Tong University
 
08:30-08:52, Paper ThAT11.1 Add to My Program
Robust Trading Strategies for a Waste-To-Energy Combined Heat and Power Plant in a Day-Ahead Electricity Market
Hu, ChenlianShanghai Jiao Tong University
Liu, XiaoShanghai Jiao Tong University
Lu, JieUniversity of Technology, Sydney
 
08:52-09:14, Paper ThAT11.2 Add to My Program
Stochastic Location-Allocation Modelling for Emergency Mobile Blood Collection (I)
Zhang, XilinShanghai Jiao Tong University
Liu, XiaoShanghai Jiao Tong University
Song, XiangUniversity of Portsmouth
Zheng, MeimeiShanghai Jiao Tong University
 
09:14-09:36, Paper ThAT11.3 Add to My Program
Grouping-Matching-Greedy Heuristic for the Single-Machine Flow-Rack AS/RS with Duration-Of-Stay Storage Policy
Chen, ZhuxiYangzhou University
Gupta, Jatinder N. D.University of Alabama in Huntsville
 
09:36-09:58, Paper ThAT11.4 Add to My Program
Manufacturing and Supply Chain Financing: Leveraging Machine Learning Techniques to Track Collateral Asset Price Change for Operational Decision Support (I)
Luo, ZongweiSUSTECH
He, RuizhiSUSTECH
Khan, ImranSUSTECH
 
09:58-10:20, Paper ThAT11.5 Add to My Program
A Bi-Level Bi-Objective Mathematical Model for Stop Location in a School Bus Routing Problem
Seyed Parsa, ParvasiUniversity of Tehran
Tavakkoli-Moghaddam, RezaUniversity of Tehran
Ata Allah, TaleizadehUniversity of Tehran
Mohammad, SoveizyK.N. Toosi University of Technology
 
ThAT12 Invited Session, 101 Add to My Program 
Knowledge Modelling for Digital Transformation and Digitalization of
Companies
 
 
Chair: Zdravkovic, JelenaStockholm University
Co-Chair: Stirna, JanisStockholm University
 
08:30-08:52, Paper ThAT12.1 Add to My Program
Towards Data-Driven Capability Interface (I)
Zdravkovic, JelenaStockholm University
Stirna, JanisStockholm University
 
08:52-09:14, Paper ThAT12.2 Add to My Program
Fuzzy Logic Based Modelling of Cast Component Properties (I)
Tan, HeJönköping University
Tarasov, VladimirJönköping University
Jarfors, AndersJönköping University
Seifeddine, SalemJönköping University
 
09:14-09:36, Paper ThAT12.3 Add to My Program
Ontology-Based Reconfigurable DSL for Planning Technical Services (I)
Ulitin, BorisNational Research University Higher School of Economics, Nizhny
Babkin, EduardNational Research University Higher School of Economics, Nizhny
 
09:36-09:58, Paper ThAT12.4 Add to My Program
Exploring Opportunities for Artificial Emotional Intelligence in Service Production Systems (I)
Amorim, MarleneUniversity of Aveiro
Cohen, YuvalAfeka Tel Aviv College of Engineering
Reis, JoãoAcademia Militar
Rodrigues, MárioUniversity of Aveiro
 
09:58-10:20, Paper ThAT12.5 Add to My Program
Knowledge Net: Model and System for Accumulation, Representation, and Use of Knowledge (I)
Tushkanova, OlgaSPIIRAS
Samoylov, VladimirInfo Wings LLC
 
ThAT13 Open Invited Track, 102 Add to My Program 
Industrial Robotics: Modeling, Control and Applications - III  
 
Chair: Abba, GabrielEcole Nationale Supérieure Des Arts Et Métiers
Co-Chair: Klimchik, AlexandrInnopolis University
 
08:30-08:52, Paper ThAT13.1 Add to My Program
Error Analysis in Solving the Inverse Problem of the Cable-Driven Parallel Underactuated Robot Kinematics and Methods for Their Elimination (I)
Maloletov, AlexanderInnopolis University
Klimchik, AlexandrInnopolis University
Fadeev, MikhailInnopolis University
 
08:52-09:14, Paper ThAT13.2 Add to My Program
Path Planning for Robotic Grinding on a Large Forged Workpiece (I)
Didi Chaoui, MohamedUniversité De Lorraine
Leonard, FrancoisENIM
Abba, GabrielEcole Nationale Supérieure Des Arts Et Métiers
 
09:14-09:36, Paper ThAT13.3 Add to My Program
Experimental Dynamic Identification of a YuMi Collaborative Robot (I)
Taghbalout, MeryemUniversité De Lorraine
Antoine, Jean-François, OlivierUniversity of Lorraine
Abba, GabrielEcole Nationale Supérieure Des Arts Et Métiers
 
09:36-09:58, Paper ThAT13.4 Add to My Program
Methods and Tools of Improving Steel Manufacturing Processes: Current State and Future Methods
Backman, JereVTT Technical Research Centre of Finland Ltd
Kyllönen, VesaVTT Technical Research Centre of Finland Ltd
Helaakoski, HeliVTT Technical Research Centre of Finland Ltd
 
09:58-10:20, Paper ThAT13.5 Add to My Program
Pre-Optimizing Tools Positions for Turrets-Based CNC Machines When Facing Arbitrary Sequences of Production
Ménard, Marc-AndréUniversité Laval
Quimper, Claude-GuyUniversité Laval
Gaudreault, JonathanUniversite Laval
 
ThAT14 Regular Session, 103 Add to My Program 
Interoperability and Information Management - III  
 
Chair: Tiwari, Manoj KIndian Institute of Technology, Kharagpur
Co-Chair: Deshpande, VarunUniversité Paris-Est, France
 
08:30-08:52, Paper ThAT14.1 Add to My Program
Analysis of Digital Transformation Strategies with an Integrated Fuzzy AHP Axiomatic Design Methodology
Güler, MerveGalatasaray University
Buyukozkan, GulcinGalatasaray University
 
08:52-09:14, Paper ThAT14.2 Add to My Program
Modeling for Deployment of Digital Technologies in the Cold Chain
Gupta, Vishal KumarIndian Institute of Technology, Kharagpur
Chaudhuri, AtanuDepartment of Materials and Production, Aalborg University
Tiwari, Manoj KIndian Institute of Technology, Kharagpur
 
09:14-09:36, Paper ThAT14.3 Add to My Program
Formal Methods Based Security for Cloud-Based Manufacturing Cyber-Physical Systems (I)
Muniasamy, KandasamyBlueJeans
Srinivasan, SeshadhriUniversity of Sannio
Vain, JüriTallinn University of Technology
M, SethumadavanAmrita Vishwapetam
 
09:36-09:58, Paper ThAT14.4 Add to My Program
PulSec: Secure Element Based Framework for Sensors Anomaly Detection in Industry 4.0
Deshpande, VarunUniversité Paris-Est, France
George, LaurentESIEE Paris
Badis, HakimUPEM, France
 
09:58-10:20, Paper ThAT14.5 Add to My Program
Collaboration Evaluation Methodology for Experience Reuse in Industrial Processes
GONZALEZ , Diana Sofia, MelendezAxsens
Coudert, ThierryUniversity of Toulouse
Geneste, LaurentEcole Nationale d'Ingénieurs De Tarbes
De Valroger, AymericAXSENS SAS
 
ThAT15 Invited Session, 107 Add to My Program 
Product Service Systems (servitization) in New ICTs Era - II  
 
Chair: Jiang, ZhibinShanghai Jiao Tong University
Co-Chair: Wang, KangzhouLanzhou University
 
08:30-08:52, Paper ThAT15.1 Add to My Program
Competitiveness of Servitization with New Transaction Base (I)
Wang, KangzhouLanzhou University
Huang, TushanLanzhou University
Jiang, ZhibinShanghai Jiao Tong University
 
08:52-09:14, Paper ThAT15.2 Add to My Program
Exploring Servitization from Value Creation Path: A Systematic Review on Empirical Investigation (I)
Niu, YimengShanghai Jiaotong University
Jiang, ZhibinShanghai Jiao Tong University
Wang, KangzhouLanzhou University
 
09:14-09:36, Paper ThAT15.3 Add to My Program
Facilitating Consistency of Business Model and Technical Models in Product-Service-Systems Development: An Ontology Approach (I)
Zou, MinjieTechnical University of Munich
Basirati, MohammadrezaTechnical University Munich
Bauer, HaraldTechnical University Munich
Kattner, NiklasTechnical University Munich
Reinhart, GuntherFraunhofer Institute for Machine Tools and Forming Technology
Lindemann, UdoTechnische Universitaet Muenchen
Böhm, MarkusTechnical University of Munich
Krcmar, HelmutTechnische Universität München
Vogel-Heuser, BirgitTechnical University of Munich
 
09:36-09:58, Paper ThAT15.4 Add to My Program
Contributions of Industry 4.0 to Quality Management – a SCOR Perspective (I)
Müller, Julian MariusLogistics and Operations Management, Salzburg Univeristy of Appl
 
ThAT16 Invited Session, 108 Add to My Program 
Production and Supply Chain Planning in the Semiconductor Industry  
 
Chair: Reiner, GeraldVienna University of Economics and Business
Co-Chair: Wichmann, MatthiasTU Braunschweig
 
08:30-08:52, Paper ThAT16.1 Add to My Program
Application of a FMEA Method Combining Interval 2-Tuple Linguistic Variables and Grey Relational Analysis in Preoperative Medical Service Process (I)
Shi, SuxiaShanghai Pulmonary Hospital
Fei, HongyingShanghai University
Xu, XueguoShanghai University
 
08:52-09:14, Paper ThAT16.2 Add to My Program
Application of Machine Learning on Plan Instability in Master Production Planning of a Semiconductor Supply Chain (I)
Lauer, TimInfineon Technologies AG
Legner, SarahInfineon Technologies AG
Henke, MichaelTechnical University of Dortmund
 
09:14-09:36, Paper ThAT16.3 Add to My Program
A Survey of Model-Based System Engineering Methods to Analyse Complex Supply Chains: A Case Study in Semiconductor Supply Chain (I)
Alizadeh Mousavi, BehrouzUniversity of Limerick
Azzouz, RadhiaUniversity of Limerick
Heavey, CathalUniversity of Limerick
Ehm, HansInfineon Technologies AG
 
09:36-09:58, Paper ThAT16.4 Add to My Program
Optimizing Lot Priority Rules in Semiconductor Production Systems (I)
Oberegger, BernhardVienna University of Economics and Business
Rabta, BoualemUniversity of Klagenfurt
Reiner, GeraldVienna University of Economics and Business
 
09:58-10:20, Paper ThAT16.5 Add to My Program
Horizontal Bullwhip Effect - Empirical Insights into the System Dynamics of Automotive Supply Networks
Gruchmann, TimWestcoast University of Applied Sciences
Neukirchen, ThomasFOM University of Applied Sciences
 
ThAT17 Open Invited Track, 109 Add to My Program 
Supply Chain Risk Management - II  
 
Chair: Lucker, FlorianCass Business School
Co-Chair: Allaoui, HamidUniversité D'Artois
 
08:30-08:52, Paper ThAT17.1 Add to My Program
Using Inventory to Mitigate the Ripple Effect (I)
Lucker, FlorianCity, University of London
 
08:52-09:14, Paper ThAT17.2 Add to My Program
Bullwhip Effect of Weighted Moving Average Forecast under Stochastic Lead Time (I)
Nakade, KoichiNagoya Institute of Technology
Aniyama, YutaNagoya Institute of Technology
 
09:14-09:36, Paper ThAT17.3 Add to My Program
Possible Ways of Assessing the Resilience of Supply Chain Networks in Conditions of Unpredictable Disruptions (I)
Pavlov, AlexanderMozhaisky Military Aerospace Academy
Pavlov, DmitryMozhaisky Military Aerospace Academy
Zakharov, ValeriiSt. Petersburg Institute for Informatics and Automation of the R
 
09:36-09:58, Paper ThAT17.4 Add to My Program
Manufacturer’s Strategic Risk Temperature Assessment with Convergent Approach, Cognitive Modelling and Blockchain Technology (I)
Raikov, AlexanderInstitute of Control Sciences RAS
 
09:58-10:20, Paper ThAT17.5 Add to My Program
Risk Budget Planning through Assessing the Criticality and Vulnerability of Supply Network Entities Facing Disruption Risks (I)
Bugert, NielsTU Dresden
 
ThAT18 Invited Session, 110 Add to My Program 
Industrial Symbioses: Design, Management, Control  
 
Chair: Roy, DanielEcole Nationale D'ingénieurs De Metz
Co-Chair: Gola, ArkadiuszFaculty of Management, Lublin University of Technology,
 
08:30-08:52, Paper ThAT18.1 Add to My Program
Prediction of Variable Technological Operation Times in Production Jobs Scheduling (I)
Sobaszek, LukaszLublin University of Technology
Gola, ArkadiuszFaculty of Management, Lublin University of Technology,
Kozłowski, EdwardLublin University of Technology
 
08:52-09:14, Paper ThAT18.2 Add to My Program
Decision Variables for Inbound Transportation Redesign in a Chemical Manufacturing Supply Chain (I)
Andreassen, Ninni KristinaNotwegian University of Science and Technology
Oluyisola, Olumide EmmanuelNorwegian University of Science and Technology (NTNU), Trondheim
Strandhagen, Jan OlaNorwegian University of Science and Technology
Semini, MarcoNorwegian University of Science and Technology
 
09:14-09:36, Paper ThAT18.3 Add to My Program
Supply Chain and Eco-Industrial Park Concurrent Design (I)
Castiglione, ClaudioIstituto Italiano Di Tecnologia
Alfieri, AriannaPolitecnico Di Torino
 
09:36-09:58, Paper ThAT18.4 Add to My Program
Mathematical Modelling for Flows Optimization within an Industrial Symbiosis (I)
Nouinou, HajarUniversité De Technologies De Troyes (UTT)
Roy, DanielEcole Nationale D'ingénieurs De Metz
Hennequin, SophieENIM
 
09:58-10:20, Paper ThAT18.5 Add to My Program
Collaborative Lot-Sizing Problem for an Industrial Symbiosis (I)
Daquin, CéciliaUniversité D'Artois
Allaoui, HamidUniversité D'Artois
Goncalves, GillesUniversité D'Artois
Hsu, TientéUniversité D'Artois
 
ThAT19 Special Session, Audimax Add to My Program 
Meet the Editors  
 
Chair: Ivanov, DmitryBerlin School of Economics and Law
 
ThP1L Plenary Session, Audimax Add to My Program 
Plenary IV - Holger Kohl: Modular Shopfloor-IT – Intelligent Process
Management of Customer-Specific Products
 
 
Chair: Meerkov, Semyon M.Univ. of Michigan
 
11:00-11:45, Paper ThP1L.1 Add to My Program
Modular Shopfloor-IT – Intelligent Process Management of Customer-Specific Products
Kohl, HolgerTU Berlin
 
ThP2L Plenary Session, Audimax Add to My Program 
Plenary V - Srinivas Talluri: Models for Evaluating and Monitoring
Efficiency of Supply Chain Network Designs
 
 
Chair: Meerkov, Semyon M.Univ. of Michigan
 
11:45-12:30, Paper ThP2L.1 Add to My Program
Models for Evaluating and Monitoring Efficiency of Supply Chain Network Designs
Talluri, SrinivasMichigan State University
 
ThP3L Plenary Session, Audimax Add to My Program 
Plenary VI - Richard Hartl: Solution Approaches and Incentive Schemes in
Collaborative Logistics Planning
 
 
Chair: Villa, AgostinoPolitecnico Di Torino
 
13:30-14:15, Paper ThP3L.1 Add to My Program
Solution Approaches and Incentive Schemes in Collaborative Logistics Planning
Hartl, Richard F.Univ of Vienna
 
ThP4L Plenary Session, Audimax Add to My Program 
Plenary VII - Boris Sokolov: Planning and Scheduling by Optimal Control:
Fundamentals and Applications to Cyber-Physical and Industry 4.0
Systems
 
 
Chair: Villa, AgostinoPolitecnico Di Torino
 
14:15-15:00, Paper ThP4L.1 Add to My Program
Planning and Scheduling by Optimal Control: Fundamentals and Applications to Cyber-Physical and Industry 4.0 Systems
Sokolov, BorisSPIIRAS
 
ThBT1 Open Invited Track, 001 Add to My Program 
Intelligent Methods and Systems Supporting Supply Chain Decision Making -
II
 
 
Chair: Bendul, JuliaRWTH Aachen University
Co-Chair: Burinskiene, AurelijaVilnius Gediminas Technical University
 
15:30-15:52, Paper ThBT1.1 Add to My Program
Simulation-Based Analysis of the Interaction of a Physical and a Digital Twin in a Cyber-Physical Production System (I)
Ait Alla, AbderrahimBIBA – Bremer Institut Für Produktion Und Logistik GmbH at the U
Kreutz, MarkusBIBA – Bremer Institut Für Produktion Und Logistik GmbH
Rippel, DanielBIBA - Bremer Institut Für Produktion Und Logistik GmbH at the U
Lütjen, MichaelBIBA - Bremer Institut Für Produktion Und Logistik GmbH at the U
Freitag, MichaelUniversity of Bremen
 
15:52-16:14, Paper ThBT1.2 Add to My Program
A Review on the Planning Problem for the Installation of Offshore Wind Farms (I)
Rippel, DanielBIBA - Bremer Institut Für Produktion Und Logistik GmbH at the U
Jathe, NicolasBIBA - Bremer Institut Für Produktion Und Logistik GmbH
Becker, MatthiasUniversity Hannover, FG Simulation
Lütjen, MichaelBIBA - Bremer Institut Für Produktion Und Logistik GmbH at the U
Szczerbicka, HelenaUniversity Hannover, FG Simulation
Freitag, MichaelUniversity of Bremen
 
16:14-16:36, Paper ThBT1.3 Add to My Program
Towards a Data-Driven Predictive-Reactive Production Scheduling Approach Based on Inventory Availability (I)
Ledoux Takeda Berger, SatieUniversidade Federal De Santa Catarina
Mariani Zanella, RenataUniversidade Federal De Santa Catarina
Frazzon, Enzo MorosiniFederal University of Santa Catarina
 
16:36-16:58, Paper ThBT1.4 Add to My Program
Evolution of Global Manufacturing Networks and xKD Supply Chains: A Cross Case Study of Six Global Automotive Manufacturers (I)
Bendul, JuliaRWTH Aachen University
Erfurth, ToniJacobs University Bremen
 
16:58-17:20, Paper ThBT1.5 Add to My Program
The Sustainability and Reduction of Waste in Freight Delivery Using Simulation Study (I)
Burinskiene, AurelijaVilnius Gediminas Technical University
 
ThBT2 Invited Session, 002 Add to My Program 
Advanced Reconfigurable Manufacturing System  
 
Chair: Delorme, XavierMines Saint-Etienne
Co-Chair: Haddou Benderbal, HichemLIS Research Laboratory, Aix Marseille University
 
15:30-15:52, Paper ThBT2.1 Add to My Program
Adaptation of Manufacturing Machines by the Use of Multiple-Domain-Matrices and Variability Models (I)
Hoang, Xuan-LuuHelmut Schmidt Universitaet
Caesar, BirteHelmut Schmidt University
Fay, AlexanderHelmut Schmidt Universitaet
 
15:52-16:14, Paper ThBT2.2 Add to My Program
Hybrid Optimisation Approach for Sequencing and Assignment Decision-Making in Reconfigurable Assembly Lines (I)
Maganha, IsabelaUniversity of Coimbra
Silva, CristóvãoCEMUC, University of Coimbra
Klement, NathalieArts Et Métiers
Beauville dit Eynaud, AmélieArts Et Métiers ParisTech (LSIS)
Durville, LaurentPSA Groupe
Moniz, SamuelUniversity of Coimbra Faculty of Sciences and Technology
 
16:14-16:36, Paper ThBT2.3 Add to My Program
Integrated Decision Process to Design Manufacturing Systems towards Industry 4.0 (I)
El Alaoui El Abdellaoui, MahdiMines Saint-Etienne
Grimaud, FrédéricEcole Des Mines De Saint-Etienne
Gianessi, PaoloMines Saint Etienne
Delorme, XavierMines Saint-Etienne
 
16:36-16:58, Paper ThBT2.4 Add to My Program
A New Hybrid Approach for Machine Layout Design under Family Product Evolution for Reconfigurable Manufacturing Systems (I)
Haddou Benderbal, HichemLIS Research Laboratory, Aix Marseille University
Benyoucef, LyesAix-Marseille University
 
ThBT4 Open Invited Track, 013 Add to My Program 
Cybersecurity of Control and Safety Systems - II  
 
Chair: Promyslov, VitalyV.A. Trapeznikov Institute of Control Sciences
Co-Chair: Jharko, ElenaV.A. Trapeznikov Institute of Control Sciences
 
15:30-15:52, Paper ThBT4.1 Add to My Program
Safety Functions and Software Verification of NPP Safety Important Systems (I)
Jharko, ElenaV.A. Trapeznikov Institute of Control Sciences
 
15:52-16:14, Paper ThBT4.2 Add to My Program
“Safety Management System” and Significant Plants of Critical Information Infrastructure (I)
Kalashnikov, AndreyV. A. Trapeznikov Institute of Control Sciences of Russian Acade
Sakrutina, EkaterinaV.A. Trapeznikov Institute of Control Sciences of Russian Academ
 
16:14-16:36, Paper ThBT4.3 Add to My Program
Method of Verification of Robotic Group Agents in the Conditions of Communication Facility Suppression (I)
Iskhakova, AnastasiaV. A. Trapeznikov Institute of Control Sciences of Russian Acade
Iskhakov, AndreyV. A. Trapeznikov Institute of Control Sciences of Russian Acade
Meshcheryakov, RomanV. A. Trapeznikov Institute of Control Sciences of Russian Acade
Jharko, ElenaV.A. Trapeznikov Institute of Control Sciences
 
ThBT5 Open Invited Track, 014 Add to My Program 
Planning and Scheduling of Manufacturing Processes - IV  
 
Chair: Müller, DavidUniversity of Siegen
Co-Chair: Vieira, Susana M.Technical University of Lisbon, Instituto SuperiorT´ecnico, CIS/IDMEC –LAETA
 
15:30-15:52, Paper ThBT5.1 Add to My Program
A Permutation-Based Heuristic Method for the Blocking Job Shop Scheduling Problem (I)
Lange, JuliaOtto-Von-Guericke University Magdeburg
Werner, FrankOtto-Von-Guericke-University Magdeburg
 
15:52-16:14, Paper ThBT5.2 Add to My Program
A Hybrid Optimization Algorithm with Genetic and Bacterial Operators for the Design of Cellular Manufacturing Systems (I)
Mejia-Moncayo, CamiloUniversidad EAN
Battaïa, OlgaISAE-SUPAERO
 
16:14-16:36, Paper ThBT5.3 Add to My Program
Batch Scheduling with Deadlines on a Single Machine to Minimize the Total Setup Cost
Pesch, ErwinUniversity of Siegen
Barketau, MaksimUIIP NAS
Kress, DominikUniversity of Siegen
Müller, DavidUniversity of Siegen
 
16:36-16:58, Paper ThBT5.4 Add to My Program
Practical Reinforcement Learning - Experiences in Lot Scheduling Application
Rummukainen, HannuVTT Technical Research Centre of Finland
Nurminen, Jukka K.VTT Technical Research Centre of Finland; Aalto University
 
16:58-17:20, Paper ThBT5.5 Add to My Program
Dual Resource Constrained Scheduling for Quality Control Laboratories (I)
Cunha, MarianaIDMEC, Instituto Superior Técnico, Universidade De Lisboa
Viegas, JoaquimIDMEC, Instituto Superior Técnico, Universidade De Lisboa, Portu
Martins, Miguel S. E.IDMEC, Instituto Superior Técnico, Universidade De Lisboa, Portu
Coito, TiagoInstituto Superior Técnico, Universidade De Lisboa
Costigliola, AndreaHovione Farmaciência, S.A
Figueiredo, Joao ManuelUniversidade Evora
Sousa, Joao M. C.Technical Univ of Lisbon, Instituto Superior Tecnico
Vieira, Susana M.Technical University of Lisbon, Instituto SuperiorT´ecnico, CIS/I
 
ThBT6 Regular Session, 015 Add to My Program 
Production Planning and Control  
 
Chair: Modrak, VladimirTechnical University of Kosice, Faculty of Manufacturing Technologies with Seat in Presov
Co-Chair: Perlman, YaelBar-Ilan University, Ramat Gan, Israel
 
15:30-15:52, Paper ThBT6.1 Add to My Program
POLCA: Centralised vs. Decentralised Job Release
Fernandes, Nuno O.Instituto Politécnico De Castelo Branco
Thürer, MatthiasInstitute of Physical Internet, Jinan University
Ferreira, Luis PintoISEP – School of Engineering, Polytechnic of Porto
Carmo-Silva, SílvioUniversity of Minho
 
15:52-16:14, Paper ThBT6.2 Add to My Program
Balancing Non-Bottleneck Stations Using Simple Assembly Line Balancing Models
Lingitz, LukasFraunhofer Austria Research GmbH
Gallina, ViolaFraunhofer Austria Research Gmbh
Kardos, CsabaComputer and Automation Research Institute, HungarianAcademy Of
Koltai, TamasBudapest University of Technology and Economics
Sihn, WilfriedVienna University of Technology, Fraunhofer Austria Research Gmb
 
16:14-16:36, Paper ThBT6.3 Add to My Program
An Interactive DSS to Improve Decision-Making in the (r, Q) Policy
Molinaro, MargheritaUniversity of Udine
Romano, PietroUniversity of Udine
Battistutta, MarcoNovalia Srl
Da Re, GiuliaUniversity of Udine
 
16:36-16:58, Paper ThBT6.4 Add to My Program
Exploring the Complexity Levels of Discrete Manufacturing Processes (I)
Modrak, VladimirTechnical University of Kosice, Faculty of Manufacturing Technol
Soltysova, ZuzanaUniversity of Kosice, Faculty of Manufacturing Technologies With
 
16:58-17:20, Paper ThBT6.5 Add to My Program
Inventory Levels of Two Stockout-Based Substitutable Products under Centralized and Competitive Settings
Perlman, YaelBar-Ilan University, Ramat Gan, Israel
 
ThBT7 Invited Session, 016 Add to My Program 
Modeling and Data Analytics for Zero Defect Manufacturing  
 
Chair: Magnanini, Maria ChiaraPolitecnico Di Milano
Co-Chair: Zörrer, HelmutProfactor GmbH
 
15:30-15:52, Paper ThBT7.1 Add to My Program
Flow Network Control Via Substituted Flows Determining the Ratio of Parallel Flows (I)
Neifer, Alexander ManuelUniversität Stuttgart, Robert Bosch GmbH
Appel, Marcus WernerTU Darmstadt
Walther, MichaelRobert Bosch GmbH
Konigorski, UlrichTechnische Universität Darmstadt
 
15:52-16:14, Paper ThBT7.2 Add to My Program
Using Business Analytics for Decision Support in Zero Defect Manufacturing of Composite Parts in the Aerospace Industry (I)
Zörrer, HelmutProfactor GmbH
Steringer, RobertProfactor GmbH
Zambal, SebastianProfactor GmbH
Eitzinger, ChristianProfactor GmbH
 
16:14-16:36, Paper ThBT7.3 Add to My Program
Using Discrete Event Simulation in Multiple System Life Cycles to Support Zero-Defect Composite Manufacturing in Aerospace Industry (I)
Steringer, RobertProfactor GmbH
Zörrer, HelmutProfactor GmbH
Zambal, SebastianProfactor GmbH
Eitzinger, ChristianProfactor GmbH
 
16:36-16:58, Paper ThBT7.4 Add to My Program
A Control Model for Downstream Compensation Strategy in Multi-Stage Manufacturing Systems of Complex Parts (I)
Magnanini, Maria ChiaraPolitecnico Di Milano
Eger, FlorianUniversity of Stuttgart
Reiff, ColinUniversity of Stuttgart
Colledani, MarcelloPolitecnico Di Milano
Verl, AlexanderUniversity of Stuttgart
 
16:58-17:20, Paper ThBT7.5 Add to My Program
The Maturity of Business Partners in the Supply Logistics for Manufacturing Enterprises within the Sector of Agricultural Machinery – Original Concept and Application (I)
Niewiadomski, PrzemysławUniwersytet Zielonogórski
Kułyk, PiotrUniversity of Zielona Góra
 
ThBT8 Invited Session, 017 Add to My Program 
Nonstationarity in Inventory Control  
 
Chair: Rossi, RobertoUniversity of Edinburgh Business School
Co-Chair: Prestwich, SteveUniversity College Cork
 
15:30-15:52, Paper ThBT8.1 Add to My Program
A Cash Constrained Single Item Stochastic Lot-Sizing Problem (I)
Chen, ZhenSouthwest University
Rossi, RobertoUniversity of Edinburgh Business School
 
15:52-16:14, Paper ThBT8.2 Add to My Program
On Computational Procedures for Value Iteration in Inventory Control (I)
Hendrix, Eligius MTUniversidad De Málaga
Kortenhorst, CleoWageningen University
Ortega, GloriaUniversidad De Málaga
 
16:14-16:36, Paper ThBT8.3 Add to My Program
Stochastic Inventory Control: A Literature Review (I)
Ma, XiyuanUniversity of Edinburgh
Rossi, RobertoUniversity of Edinburgh Business School
Archibald, ThomasUniversity of Edinburgh
 
16:36-16:58, Paper ThBT8.4 Add to My Program
An Efficient Method for Solving Stochastic Inventory Lot-Sizing Problem
Tarim, S. ArmaganUniversity College Cork
Kilic, Onur A.Hacettepe University
 
16:58-17:20, Paper ThBT8.5 Add to My Program
Tuning Forecasting Algorithms for Black Swan Events (I)
Prestwich, SteveUniversity College Cork
 
ThBT9 Invited Session, 018 Add to My Program 
Modelling Assembly Design and Operations: Towards “Assembly System 4.0”  
 
Chair: Cohen, YuvalAfeka Tel Aviv College of Engineering
Co-Chair: Pilati, FrancescoUniversity of Bologna
 
15:30-15:52, Paper ThBT9.1 Add to My Program
Multi-Manned Assembly Line Synchronization with Compatible Mounting Positions, Equipment Sharing and Workers Cooperation (I)
Ferrari, EmilioUniversity of Bologna
Faccio, MaurizioUniversity of Padova
Gamberi, MauroUniversity of Bologna, Department of Industrial Engineering
Margelli, SilviaUniversity of Bologna
Pilati, FrancescoUniversity of Bologna
 
15:52-16:14, Paper ThBT9.2 Add to My Program
Hierarchy of Smart Awareness in Assembly 4.0 Systems (I)
Cohen, YuvalAfeka Tel Aviv College of Engineering
Faccio, MaurizioUniversity of Padova
Elaluf, AmirBar-Ilan University
 
16:14-16:36, Paper ThBT9.3 Add to My Program
Towards Assembly 4.0: Graduation Intelligent Manufacturing System for Fixed Position Assembly Islands (I)
Guo, DaqiangThe University of Hong Kong & Southern University of Science And
Lin, PengUniverisity of Hong Kong
Lyu, ZhongyuanThe University of Hong Kong
Ling, ShiquanThe University of Hong Kong, Southern University of Science And
Li, MingxingThe University of Hong Kong
Huang, George Q.The University of Hong Kong
Rong, YimingSouthern University of Science and Technology
 
16:36-16:58, Paper ThBT9.4 Add to My Program
Strategic View on Cobot Deployment in Assembly 4.0 Systems (I)
Cohen, YuvalAfeka Tel Aviv College of Engineering
Shoval, ShragaAriel University
Faccio, MaurizioUniversity of Padova
 
16:58-17:20, Paper ThBT9.5 Add to My Program
Conceptualising Assembly 4.0 through the Drone Factory (I)
Fast-Berglund, AasaChalmers University of Technology
Åkerman, MagnusChalmers
Li, DanChalmers University of Technology
Salunkhe, OmkarChalmers University of Technology
 
ThBT10 Invited Session, 019 Add to My Program 
Big Data Analytics in Smart Manufacturing Systems  
 
Chair: Jiang, ZhibinShanghai Jiao Tong University
Co-Chair: Qin, WeiShanghai Jiao Tong University
 
15:30-15:52, Paper ThBT10.1 Add to My Program
A Self-Learning Classification Framework for Industrial Time Series Streams (I)
Ma, ZhenjieHuazhong University of Science and Technology
Shi, KeHuazhong University of Science and Technology
Feng, KangHuazhong University of Science and Technology
 
15:52-16:14, Paper ThBT10.2 Add to My Program
Control Chart Pattern Recognition Method Based on Improved One-Dimensional Convolutional Neural Network (I)
Xu, JieShanghai Jiao Tong University
Lv, HuichunShanghai JiaoTong University
Zhuang, ZilongShanghai Jiao Tong University
Lu, ZhiyaoShanghai Jiao Tong University
Zou, DeweiShanghai Jiao Tong University
Qin, WeiShanghai Jiao Tong University
 
16:14-16:36, Paper ThBT10.3 Add to My Program
An Intelligent Recommendation Method for Service Personalized Customization (I)
Li, QiShanghai Jiao Tong University
Miao, RuiShanghai Jiao Tong University
Zhang, JieDonghua University
Deng, XiaoxuShanghai Jiao Tong University
 
16:36-16:58, Paper ThBT10.4 Add to My Program
Tool Breakage Detection of Milling Cutter Insert Based on SVM (I)
Sun, ShixuShanghai Jiao Tong University
Hu, XiaofengShanghai JiaoTong University
Cai, WeiliShanghai Jiao Tong University
Zhong, JinShanghai Jiao Tong University
 
16:58-17:20, Paper ThBT10.5 Add to My Program
Application and Research on Online Evaluation for Service Capability of Cloud Manufacturing Supplier (I)
Wei, JianTongji University
Lu, JianfengTongji University
Han, TiaojuanTongji University
 
ThBT11 Regular Session, 020 Add to My Program 
Or Applications - III  
 
Chair: Chernonog, TatyanaBar Ilan University
Co-Chair: Foropon, CyrilMontpellier Business School
 
15:30-15:52, Paper ThBT11.1 Add to My Program
Recalculating the Length of the Longest Path in Perturbed Directed Acyclic Graph
Madraki, GolshanClarkson University
Judd, RobertOhio Univ
 
15:52-16:14, Paper ThBT11.2 Add to My Program
Metaheuristics for Energy-Efficient No-Wait Flowshops: A Trade-Off between Makespan and Total Energy Consumption (I)
Tasgetiren, Mehmet FatihYasar University
Gao, LiangHuazhong University of Science and Technology
Pan, QuanNorthwestern Polytechnical University
Li, XinyuHuazhong University of Science & Technology
 
16:14-16:36, Paper ThBT11.3 Add to My Program
Application of Differential Evolution with Selective Pressure to Economic Dispatch Optimization Problems
Stanovov, VladimirReshetnev Siberian State University of Science and Technology
Akhmedova, ShakhnazReshetnev Siberian State University of Science and Technology
Semenkin, EugeneReshetnev Siberian State University of Science and Technology
 
16:36-16:58, Paper ThBT11.4 Add to My Program
A Branch and Price Algorithm for the Electric Capacitated Profitable Tour Problem with Mandatory Stops
Cortés-Murcia, David L.Université De Technologie De Troyes
Afsar, MuratUniversity of Technology of Troyes
Prodhon, CarolineUniversité De Technologie De Troyes
 
16:58-17:20, Paper ThBT11.5 Add to My Program
Revenue Sharing Contracts in a Supply Chain: A Literature Review (I)
Bart, NellyBar Ilan University
Chernonog, TatyanaBar Ilan University
Avinadav, TalBar Ilan University
 
ThBT12 Invited Session, 101 Add to My Program 
Knowledge Modelling for Digital Transformation and Digitalization of
Companies - II
 
 
Chair: Smirnov, AlexanderSt.Peterburg Institute for Informatics andAutomationoftheRussian Academy of Sciences
Co-Chair: Sandkuhl, KurtThe University of Rostock
 
15:30-15:52, Paper ThBT12.1 Add to My Program
Framework to Support Models for Manufacturing (MfM) Methodology (I)
Mas, FernandoAirbus
Arista Rangel, RebecaAirbus
Morales-Palma, DomingoUniversidad De Sevilla
Oliva Olvera, ManuelAIRBUS
Racero, JesusUniversity of Seville
 
15:52-16:14, Paper ThBT12.2 Add to My Program
Capability-Based Semantic Interoperability of Manufacturing Resources: A BaSys 4.0 Perspective (I)
Perzylo, Alexander CliffordFortiss GmbH - An-Institut Technische Universitaet Muenchenforti
Grothoff, JulianRWTH Aachen University
Lucio, LeviFortiss GmbH
Weser, MichaelKUKA Deutschland GmbH
Malakuti, SomayehABB Corporate Research Center
Venet, PierreCorporate Research KUKA Deutschland GmbH
Aravantinos, VincentFortiss GmbH
Deppe, TorbenRWTH Aachen University
 
16:14-16:36, Paper ThBT12.3 Add to My Program
Knowledge Management 4.0: Theoretical and Practical Considerations in Cyber Physical Production Systems (I)
Ansari, FazelVienna University of Technology (TU Wien)
 
16:36-16:58, Paper ThBT12.4 Add to My Program
Task Model Representation: The Approach and Case Study (I)
Smirnov, AlexanderSt.Peterburg Institute for Informatics AndAutomationoftheRussian
Shilov, NikolaySt.Peterburg Institute for Informatics And
Shchekotov, MaximSPIIRAS
 
16:58-17:20, Paper ThBT12.5 Add to My Program
Facilitating Digital Transformation by Multi-Aspect Ontologies: Approach and Application Steps (I)
Sandkuhl, KurtThe University of Rostock
Shilov, NikolaySt.Peterburg Institute for Informatics And
Smirnov, AlexanderSt.Peterburg Institute for Informatics AndAutomationoftheRussian
 
ThBT13 Regular Session, 102 Add to My Program 
Robotics and Mechanical Engineering - I  
 
Chair: Haeussler, StefanUniversity of Innsbruck
Co-Chair: Desgagné-Lebeuf, AlexandreUniversité Laval
 
15:30-15:52, Paper ThBT13.1 Add to My Program
Optimal Synchronization of the Hot Rolling Stage in Steel Production
Ilmer, QuirinUniversity of Innsbruck
Haeussler, StefanUniversity of Innsbruck
Missbauer, HubertUniversity of Innsbruck
 
15:52-16:14, Paper ThBT13.2 Add to My Program
A Simulation Analysis of Impact of Design and Storage Policy on Performance of Single-Crane Multi-Aisle AS/RS
Singbal, VishweshIIT BOMBAY
Adil, Gajendra KIndian Institute of Technology Bombay
 
16:14-16:36, Paper ThBT13.3 Add to My Program
Layout Configuration, Maintenance Planning and Simulation of AGV Based Robotic Assembly Systems
Nemeth, IstvanBudapest University of Technology and Economics
Puspoki, JanosBudapest University of Technology and Economics
Viharos, Andor BálintBudapest University of Technology and Economics
Zsoka, LeventeBudapest University of Technology and Economics
Pirka, BenjaminBudapest University of Technology and Economics
 
16:36-16:58, Paper ThBT13.4 Add to My Program
Assembly 4.0: Wheel Hub Nut Assembly Using a Collaborative Robot
Salunkhe, OmkarChalmers University of Technology
Stensöta, OliviaChalmers University of Technology
Åkerman, MagnusChalmers
Fast-Berglund, AasaChalmers University of Technology
Alveflo, Per-AndersVolvo Group Truck Operations
 
16:58-17:20, Paper ThBT13.5 Add to My Program
Task-Based Programming and Sequence Planning for Human-Robot Collaborative Assembly
Antonelli, DarioPolitecnico Di Torino
Bruno, GiuliaPolitecnico Di Torino
Aliev, KhurshidPolitecnico Di Torino
 
ThBT14 Invited Session, 103 Add to My Program 
Physical Internet and Interconnected Logistics Services  
 
Chair: Park, Ji SooGeorgia Institute of Technology
Co-Chair: Pan, ShenleMINES ParisTech, PSL Research University
 
15:30-15:52, Paper ThBT14.1 Add to My Program
A Simulation-Optimization Approach for Two-Way Scheduling/Grouping in a Road-Rail Physical Internet Hub (I)
Chargui, TarikPolytechnic University of Hauts-De-France, Le Mont Houy
Bekrar, AbdelghaniUniversity of Valenciennes
Reghioui, MohamedUniversity Abdelmalek Essaadi
Trentesaux, DamienLAMIH UMR CNRS 8201, SurferLab, University of Valenciennes and H
 
15:52-16:14, Paper ThBT14.2 Add to My Program
Showcasing Optimization Model for Hyperconnected Showcasing Centers (I)
Park, Ji SooGeorgia Institute of Technology
Dayarian, ImanUniversity of Alabama
Montreuil, BenoitGeorgia Institute of Technology, ISYE School, Physical Internet
 
16:14-16:36, Paper ThBT14.3 Add to My Program
The Price of Anarchy for Centralising or Decentralising Freight Transport Organisation through Serious Gaming (I)
Lafkihi, MariamMINES ParisTech - PSL Research University
Pan, ShenleMINES ParisTech, PSL Research University
Ballot, EricMines ParisTech
 
16:36-16:58, Paper ThBT14.4 Add to My Program
Dynamic Pricing for Carriers in Physical Internet with Peak Demand Forecasting (I)
Qiao, BinMines ParisTech
Pan, ShenleMINES ParisTech, PSL Research University
Ballot, EricMines ParisTech
 
16:58-17:20, Paper ThBT14.5 Add to My Program
Digital Twin Driven Self-Organizing Production:a Machine Learning Approach
Cao, QuanyaoXi'an Jiaotong University, Xi'an, China
Xiao, ZhongdongXi’an Jiaotong University
 
ThBT15 Regular Session, 107 Add to My Program 
Manufacturing and Service Operations - I  
 
Chair: Amodeo, LionelUniversity of Technology of Troyes
Co-Chair: Godichaud, MatthieuUniversité De Technologie De Troyes UTT
 
15:30-15:52, Paper ThBT15.1 Add to My Program
A Kernel Search for a Patient Satisfaction-Oriented Nurse Routing Problem with Time-Windows
Gobbi, AlessandroUniversità Degli Studi Di Brescia
Manerba, DanieleDepartment of Control and Computer Engineering and ICT for City
Mansini, RenataUniversity of Brescia
Zanotti, RobertoUniversity of Brescia
 
15:52-16:14, Paper ThBT15.2 Add to My Program
Bi-Objective Framework for Planning a Supply Chain Process in Reconfigurable Manufacturing Systems (I)
Belaiche, LeilaUniversity of Biskra, Algeria
Kahloul, LaidLaboratoire LINFI, Computer Science Department, Université De Bi
Benharzallah, SaberUniversity of Biskra, Algeria
Hafidi, YousraUniversity of Tunis El Manar
 
16:14-16:36, Paper ThBT15.3 Add to My Program
EOQ Models with Stockouts for Disassembly Systems (I)
Godichaud, MatthieuUniversité De Technologie De Troyes UTT
Amodeo, LionelUniversity of Technology of Troyes
 
16:36-16:58, Paper ThBT15.4 Add to My Program
Intuitionistic Fuzzy AHP Based Strategic Analysis of Service Quality in Digital Hospitality Industry (I)
Buyukozkan, GulcinGalatasaray University
Feyzioglu, OrhanGalatasaray University
Havle, Celal AlpayGalatasaray University
 
16:58-17:20, Paper ThBT15.5 Add to My Program
Network Design for a Milk Collection Problem with Accumulation Centers and Vehicle Routing
Paredes-Belmar, GermánUniversidad Andres Bello
Leonardini, OmarUniversidad Andres Bello
 
ThBT16 Regular Session, 108 Add to My Program 
Supply Chain Management - I  
 
Chair: Menezes, MozartKedge Business School
Co-Chair: Ruiz-Hernandez, DiegoSheffield University Management School
 
15:30-15:52, Paper ThBT16.1 Add to My Program
Last Mile Logistics in Fast Fashion Supply Chains: A Case Study (I)
Alfieri, AriannaPolitecnico Di Torino
De Marco, AlbertoPolitecnico Di Torino
Pastore, EricaPolitecnico Di Torino
 
15:52-16:14, Paper ThBT16.2 Add to My Program
Complexity Measurement in Two Supply Chains with Different Competitive Priorities (I)
Sellitto, MiguelUniversidade Do Vale Do Rio Dos Sinos - Unisinos
Lolli, FrancescoUniversity of Modena and Reggio Emilia
Rimini, BiancaUniversita' Di Modena E Reggio Emilia
Balugani, EliaUniversity of Modena and Reggio Emilia
 
16:14-16:36, Paper ThBT16.3 Add to My Program
Towards an Alternative Cost-Allocation Scheme Based on a Measure for Structural Complexity
Ruiz-Hernandez, DiegoSheffield University Management School
Menezes, MozartNEOMA Business School
 
16:36-16:58, Paper ThBT16.4 Add to My Program
Designing Supply Chains Via Locating Knapsacks in a Business-To-Business Environment (I)
Menezes, MozartNEOMA Business School
Ruiz-Hernandez, DiegoSheffield University Management School
 
16:58-17:20, Paper ThBT16.5 Add to My Program
Optimal Financing Strategy for a Green Supply Chain with a Capital-Constrained Manufacturer (I)
Yang, HaoxiongBeijing Technology and Business University
Duan, WeiyuBeijing Technology and Business University
 
ThBT17 Invited Session, 109 Add to My Program 
Digital Technology, Supply Chain Risks and Uncertainty  
 
Chair: Kinra, AseemCBS
Co-Chair: Chutani, AnshumanUniversity of Nottingham
 
15:30-15:52, Paper ThBT17.1 Add to My Program
Big Data Analysis in Social Networks for Managing Risks in Clothing Industry (I)
Blekanov, IvanSt. Petersburg State University
Krylatov, AlexanderSt. Petersburg State University
Ivanov, DmitryBerlin School of Economics and Law
Bubnova, YuliaSIEMENS
 
15:52-16:14, Paper ThBT17.2 Add to My Program
The Role of Social Influence in Blockchain Adoption: The Brazilian Supply Chain Case (I)
Fosso Wamba, SamuelToulouse Business School
Maciel, QueirozUniversity of São Paulo
 
16:14-16:36, Paper ThBT17.3 Add to My Program
Complementing Decision Support and Forecasting Risk in Supply Chain with Unstructured Data (I)
Beheshti-Kashi, SamanehUniversität Bremen
Pannek, JuergenUniversity of Bremen
Kinra, AseemUniversity of Bremen
 
16:36-16:58, Paper ThBT17.4 Add to My Program
Exploring the Challenges with Applying Tracking and Tracing Technology in the Dairy Industry (I)
Ruiz Høyer, MadeleineNorwegian University of Technology and Science
Oluyisola, Olumide EmmanuelNorwegian University of Science and Technology (NTNU), Trondheim
Strandhagen, Jan OlaNorwegian University of Science and Technology
Semini, MarcoNorwegian University of Science and Technology
 
16:58-17:20, Paper ThBT17.5 Add to My Program
Supply Chain Financing with Advance Selling under Disruption
Gupta, VarunPenn State University Erie
Chutani, AnshumanUniversity of Nottingham
 
ThBT18 Invited Session, 110 Add to My Program 
Materials Management from a Linear to a Circular Business Models  
 
Chair: Paulina, Golinska-DawsonPoznan University of Technology
Co-Chair: Pawlewski, PawelPoznan University of Technology
 
15:30-15:52, Paper ThBT18.1 Add to My Program
How Manage Waste from End-Of-Life Vehicles? – Method Proposal (I)
Kosacka-Olejnik, MonikaPoznan Univeristy of Technology
 
15:52-16:14, Paper ThBT18.2 Add to My Program
Materials Management in Remanufacturing of Automotive Components – a Small Remanufacturers Perspective (I)
Paulina, Golinska-DawsonPoznan University of Technology
 
16:14-16:36, Paper ThBT18.3 Add to My Program
Relational Database Template in the Simulation Modelling of Manufacturing Systems (I)
Pawlewski, PawelPoznan University of Technology
Anholcer, MarcinPoznań University of Economics and Business
 
16:36-16:58, Paper ThBT18.4 Add to My Program
Closed-Loop Supply Chain Structure in Presence of Multiple Products
Jalali, HamedNEOMA Business School
Ansaripoor, Amir HosseinSchool of Management, Curtin Business School
De Giovanni, PietroOperations Management Department, ESSEC Business School
 
16:58-17:20, Paper ThBT18.5 Add to My Program
A Sequence-Based Metaheuristics for Tactical Distribution Problems in Closed-Loop Supply Chains
Desport, PierreUniversité De Tours
Lardeux, FredericUniversité D'Angers
Lesaint, DavidUniversité D'Angers
Di Cairano-Gilfedder, CarlaBritish Telecom
Liret, AnneBritish Telecom
Owusu, GilbertBritish Telecom
 
ThBT19 Special Session, 105 Add to My Program 
TC 5.2 Meeting (by Invitation Only)  
 
Chair: Ivanov, DmitryBerlin School of Economics and Law
Co-Chair: Dolgui, AlexandreIMT Atlantique

 
 

 
 

 

Technical Content © IFAC

This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2019 PaperCept, Inc.
Page generated 2019-08-23  07:58:48 PST  Terms of use