MMM 2021 September 1-3, 2021
Nancy, France
6th IFAC Workshop on Mining, Mineral and Metal Processing
  

Last updated on July 31, 2021. This conference program is tentative and subject to change

Technical Program for Thursday September 2, 2021

 
ThurO1C Main ROOM
Welcome Ceremony Regular Session
 
ThurM01 Room A
Hot/cold Rolling and Haulage Trolley Regular Session
Chair: Theilliol, DidierUniversity of Lorraine
 
10:00-10:20, Paper ThurM01.1 
Optimal Thread-In and Thread-Out Strategies for Heavy Plate Levelers

Brauneis, RobertTechnische Universität Wien
Steinboeck, AndreasVienna University of Technology
Kugi, AndreasVienna University of Technology
 
10:20-10:40, Paper ThurM01.2 
Practical Operation Guidance on Thermal Control of Blast Furnace

Hashimoto, YoshinariJFE Steel Corporation
 
10:40-11:00, Paper ThurM01.3 
Optimization-Based Estimator for the Lateral Strip Position in Tandem Hot Rolling

Schausberger, FlorianVoestalpine Stahl GmbH
Pietschnig, ChristopherTU Wien
Ettl, AndreasTU Wien, Christian Doppler Laboratory for Model-Based Process Co
Steinboeck, AndreasVienna University of Technology
Kugi, AndreasVienna University of Technology
 
11:00-11:20, Paper ThurM01.4 
Input-State Feedback Linearization for a High Precision Linear DC Machine Haulage Trolley

Ngwako, Mohlalakoma ThereciaWits University
Nyandoro, Otis TichatongaUniversity of the Witwatersrand, Johannesburg
 
11:20-11:40, Paper ThurM01.5 
Automatic Yaw Rotation of Plates on Roller Tables

Waldmann, AndreasAIT Austrian Institute of Technology GmbH
Kugi, AndreasTU Wien
Steinboeck, AndreasTU Wien
 
11:40-12:00, Paper ThurM01.6 
Singular Optimal Control for a High Precision Linear DC Machine Haulage Trolley

Ngwako, Mohlalakoma ThereciaWits University
Nyandoro, Otis TichatongaUniversity of the Witwatersrand, Johannesburg
 
ThurM02 Room B
Advanced Process Control Regular Session
Chair: Marx, BenoitCentre De Recherche En Automatique De Nancy
 
10:00-10:20, Paper ThurM02.1 
Nonlinear Control of Coal Separation in a Jig

Joostberens, JaroslawSilesian University of Technology
Cierpisz, StanislawInstitute of Innovative Technologies EMAG
 
10:20-10:40, Paper ThurM02.2 
Energy Consumption Prediction of Cold Source System Based on GarphSAGE

Chen, ZhiwenSchool of Automation, Central South University
Deng, QiaoCentral South University
Zhao, ZhengrunCentral South University
Sun, BeiCentral South University
Peng, TaoCentral South University
Yang, ChunhuaCentral South University
 
10:40-11:00, Paper ThurM02.3 
Optimizing Grinding Mill Performance Using Extremum Seeking Control

Ziolkowski, LukaszUniversity of Pretoria
Le Roux, Johan DerikUniversity of Pretoria
Craig, IanUniversity of Pretoria
 
11:00-11:20, Paper ThurM02.4 
A New Control Strategy for the Aluminum Reduction Process Using Economic Model Predictive Control

Shi, JingUniversity of New South Wales
Yao, YuchenUniversity of New South Wales
Bao, JieThe University of New South Wales
Skyllas-Kazacos, MariaUniversity of New South Wales
Welch, BarryUniversity of New South Wales
Jassim, AliEmirates Global Aluminium
Mahmoud, MohamedEmirates Global Aluminium
 
11:20-11:40, Paper ThurM02.5 
Application of Guidance System for Fuel and Power Management in Steel Works through Model Predictive Control

Suzuki, KatsuyaJFE Steel Corporation
Ogasahara, TomoyoshiJFE Steel Corporation
Uno, MasahiroJFE Steel Corporation
Yatsu, KazushigeJFE Steel Corporation
 
11:40-12:00, Paper ThurM02.6 
Sensor and Actuator Optimal Location for Robust Control of a Galvanizing Process

Brakna, Mohammed amine miloudUniversité De Lorraine
Marx, BenoitCentre De Recherche En Automatique De Nancy
Pham, Van ThangArcelorMittal Maizières Research
Khelassi, AhmedArcelorMittal
Maquin, DidierUniversité De Lorraine
Ragot, JoseUniversité De Lorraine
 
ThurM03 Room C
Monitoring/Safety Regular Session
Chair: Simon, ChristopheUniversity of Lorraine
 
10:00-10:20, Paper ThurM03.1 
Health State Diagnosis and Prognosis Based on Hidden Markov Model on ArcelorMittal’s Galvanizing Line

Simon, ChristopheUniversity of Lorraine
Theilliol, DidierUniversity of Lorraine
Khelassi, AhmedArcelorMittal
Weber, PhilippeUniversité De Lorraine, CNRS, (CRAN UMR 7039)
 
10:20-10:40, Paper ThurM03.2 
Anomaly-Sign Detection System for Steel Manufacturing Facilities Utilizing Data Science

Matsushita, MasafumiJFE Steel Corporation
Hirata, TakehideJFE Steel Corporation
Harada, YoheiJFE Steel Corporation
 
10:40-11:00, Paper ThurM03.3 
Discretized Thermal Model of Hall-Héroult Cells for Monitoring and Control Purposes

Wong, Choon-JieUniversity of New South Wales
Yao, YuchenUniversity of New South Wales
Bao, JieThe University of New South Wales
Skyllas-Kazacos, MariaUniversity of New South Wales
Welch, BarryUniversity of New South Wales
Jassim, AliEmirates Global Aluminium
Mahmoud, MohamedEmirates Global Aluminium
 
11:00-11:20, Paper ThurM03.4 
Fault Identification in Hydraulic Rock Drills from Indirect Measurement During Operation

Jakobsson, ErikEpiroc Rock Drills AB
Frisk, ErikLinköping University
Krysander, MattiasLinköping University
Pettersson, RobertEpiroc Rock Drills AB
 
11:20-11:40, Paper ThurM03.5 
Reconstructing Faulty Measurements at a Tailings Treatment Surge Tank

Sekila, Kamohelo MacdonaldUniversity of Pretoria
Le Roux, Johan DerikUniversity of Pretoria
 
11:40-12:00, Paper ThurM03.6 
Underflow Particle Size Estimation in Hydrocyclones by Use of Transfer Learning with Convolutional Neural Networks

Olivier, JacquesCurtin University
Aldrich, ChrisCurtin University
 
ThurP1L Room T1
“Closed-Loop Approaches for Mineral Research Extraction” - Prof. Dr.-Ing.
Jörg Benndorf
Regular Session
Chair: Kugi, AndreasTU Wien
 
ThurP2L Room T1
“Process Monitoring for Actionable Advisories in Mineral Processing :
Theory and Practice ” - Prof. Lidia AURET
Regular Session
Chair: Weber, PhilippeUniversité De Lorraine, CNRS, (CRAN UMR 7039)
 
ThurA01 Room A
Model-Based Control of Forming Processes Invited session
Chair: Meurer, ThomasChristian-Albrechts-University Kiel
Organizer: Meurer, ThomasChristian-Albrechts-University Kiel
Organizer: Herty, MichaelRwth Aachen
 
15:20-15:40, Paper ThurA01.1 
Optimal Sensor Placement for Temperature Control in a Deep Drawing Tool (I)

Wrobel, MalteChristian-Albrechts-Universität Zu Kiel
Meurer, ThomasChristian-Albrechts-University Kiel
 
15:40-16:00, Paper ThurA01.2 
Feedback Stabilization of Forming Processes (I)

Herty, MichaelRwth Aachen
Bambach, MarkusETH Zürich
Imran, MuhammadBTU Cottbus
 
16:00-16:20, Paper ThurA01.3 
Parameter Identification for a 3D Heating Process by the Adjoint Method Based on Experimental Data (I)

Wolfram, DirkChristian-Albrechts-University Kiel
Meurer, ThomasChristian-Albrechts-University Kiel
 
16:20-16:40, Paper ThurA01.4 
Model-Based Control of the Strip Roughness in Cold Rolling (I)

Schulte, ChristopherRWTH Aachen University
Li, XinyangRWTH Aachen University
Abel, DirkRWTH-Aachen University
Hirt, GerhardRWTH Aachen University
 
16:40-17:00, Paper ThurA01.5 
A Structure for the Control of Geometry and Properties of a Freeform Bending Process (I)

Ismail, AhmedTechnical University of Munich
Maier, DanielTechnical University of Munich - Chair of Metal Forming and Cast
Stebner, Sophie CharlotteRWTH Aachen University
Volk, WolframTechnical University of Munich
Münstermann, SebastianRWTH Aachen University
Lohmann, BorisTechnische Universität München
 
17:00-17:20, Paper ThurA01.6 
Soft Sensor Control for Twin Roll Casting Processes of Magnesium Alloys (I)

Kwiecien, SzymonTU Bergakademie Freiberg
Hamm, LucasFraunhofer-Institut Für Werkzeugmaschinen Und Umformtechnik
Weiner, MaxInstitute for Metal Forming - Technische Universität Bergakademi
Schmidtchen, MatthiasInstitute for Metal Forming - Technische Universität Bergakademi
Prahl, UlrichInstitute for Metal Forming - Technische Universität Bergakademi
Drossel, Welf-GuntramFraunhofer Institute IWU
 
ThurA02 Room B
Mining Operations and Measurement Regular Session
Chair: Desbiens, AndreUniversite Laval
 
15:20-15:40, Paper ThurA02.1 
Laser-Based Online Measurement for Bulk Material Monitoring and EMG iSCAN for Slab Production Quality Assurance

Klein, MathiasEMG Automation GmbH
 
15:40-16:00, Paper ThurA02.2 
Modelling the Product Mass Flow Rate of High-Pressure Grinding Rolls

Thivierge, AlexUniversité Laval
Bouchard, JocelynUniversité Laval
Desbiens, AndreUniversite Laval
 
16:00-16:20, Paper ThurA02.3 
Simulation of Haulage Systems Using a Flexible Simulation Environment

Mella, HectorUniversidad De Concepción
Sbarbaro, Daniel G.Universidad De Concepción
 
16:20-16:40, Paper ThurA02.4 
Real-Time Performance Monitoring of Electrical Submersible Pumps in SAGD Process

Fang, MengqiUniversity of Alberta
Raveendran, RahulUniversity of Alberta
Huang, BiaoUniv. of Alberta
 
ThurO2C Main ROOM
Farewell Ceremony Regular Session

 
 

 
 

 

Technical Content © IFAC

This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2021 PaperCept, Inc.
Page generated 2021-07-31  14:11:06 PST  Terms of use