AAC 2022 Paper Abstract

Close

Paper MoAT3.6

Peng, Cheng (Shanghai Jiaotong University), Chen, Li (Shanghai Jiao Tong University)

Two Layer Model Reference Adaptive Control Based on State Feedback for Engine Slipping Start of Parallel Hybrid Electric Vehicles

Scheduled for presentation during the Regular Session "Modeling, Estimation, and Control of Internal Combustion Engine - I" (MoAT3), Monday, August 29, 2022, 12:40−13:00, Pfahl Hall 140

10th IFAC International Symposium on Advances in Automotive Control, August 28-31, 2022, Columbus, Ohio, USA

This information is tentative and subject to change. Compiled on April 24, 2024

Keywords Vehicle dynamics, control and state estimation, Transmissions, brakes, steering, suspension systems, Powertrain modeling and control

Abstract

During engine slipping start (ESS) of parallel hybrid electric vehicles (HEV) with a dual-clutch transmission, the motor needs to propel the vehicle and crank the engine via the slipping clutch simultaneously. However, a lack of capability to respond to changes in driver demand can disturb normal driving habits. Meanwhile, parametric uncertainty of the clutch friction coefficient makes it hard to compensate for the clutch slipping torque. To guarantee response speed to changes in driver demand torque, a two-layer model reference adaptive controller (MRAC) is proposed for ESS utilizing state varialbes as the feedback. Under this framework, appropriate reference profiles can be generated according to the real-time driver demand torque rather than assuming that the accelerator pedal is unchanged. An auxiliary reference model is introduced in addition to the major reference model to modify the convergence rate of the tracking error without changing the well-designed reference profiles, and adaptive control laws are accordingly developed to enhance the transient performance against matched parameter uncertainty of clutch and unmatched measurement noise.

 

Technical Content Copyright © IFAC. All rights reserved.


This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2024 PaperCept, Inc.
Page generated 2024-04-24  05:50:52 PST   Terms of use